self-illuminating artists and screen printing colors

"Would you like to highlight your artistic works with self-illuminating acrylic paints? You have the option of painting, spraying or printing on foil, cardboard or fabric."

In our online shop you will find a large selection of self-illuminating paints, including screen printing ink, textile printing ink, textile paint, luminous spray paint, Acrylic paint, bright varnish, acrylic varnish, textile paints and airbrush paints for mixing and spraying.

These colors are suitable for painting, marking, filling, pouring or painting in the colors yellow, orange, red, green, blue, violet as well as white and transparent. In addition, we also have spray paints and screen printing paints for noctilucent T- Shirts on offer. Artists can also find acrylic paints and canvases for bright pictures.

Acrylic paint blue luminous for spraying

Filling: 375 ml

Application area Acrylic paint blueColuxGlow self-luminous spray paint on watery acrylate base Version for spraying self-luminous spray paint WHAT CAN COLUXGLOW PAINT DO? ColuxGlow self-luminous spray paint is a paint for surfaces made of wood and pre-painted surfaces. BRIEF DESCRIPTIONColuxGlow Self-Luminous Spray Paint is a water-based acrylic paint with a high content of afterglow pigments that store and release light energy over time. A white undercoat is recommended to achieve a good luminescent effect. APPLICATION ■ The substrate must be clean and dry - a white primer significantly increases the luminous effect, because the luminescent paint is translucent. ■ Depending on the application technique, especially for the spraying process, it can be thinned with up to 10 % quantity of demineralised water. In this case, also stir during painting in order to avoid settling of the pigments. ■ Before the coating dries, remove any masking tape that may have been used so that no film edge is formed during curing. ■ TIP: Do not use an absorbent brush or paint roller for painting! NOTEPaint contains an anti-rot biocide - symbol: CAUTION SPECIFICATION FUNCTION Decorative paint for interior and exterior use COLOUR TONE Colourless and blue luminescent DENSITY 1,35 g/l LAYER 100 my dried film CONSUMPTION 2-3 sqm / liter depending on the application APPLICATION water thinnable 10 SPRAYABLE Versions for brushing and spraying APPLICATION 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 12 hours WATERPROOF 48 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up paint within 6 months - stir up sediment!

Content: 0.375 Liter (€77.07* / 1 Liter)

€28.90*

Acrylic paint yellow green for spraying

Filling: 375 ml

Field of application Acrylic paint yellow greenColuxGlow phosphorescent marking spray paint Paint for outdoor use Version for spraying phosphorescent marking spray paint color outdoor area WHAT CAN COLUXGLOW PAINT DO? ColuxGlow phosphorescent marking spray paint for exterior use and surfaces made of wood and pre-painted surfaces. BRIEF DESCRIPTIONColuxGlow phosphorescent outdoor marking spray paint is a water-based acrylic paint with a high percentage of afterglow pigments that store and release light energy over time. A white undercoat is recommended to achieve a good luminescent effect. APPLICATION ■ The substrate must be clean and dry - a white primer significantly increases the luminous effect, because the luminescent paint is translucent. ■ Depending on the application technique, especially for the spraying process, it can be thinned with up to 10 % quantity of demineralised water. In this case, also stir during painting in order to avoid settling of the pigments. ■ Before the coating dries, remove any masking tape that may have been used so that no film edge is formed during curing. ■ TIP: Do not use an absorbent brush or paint roller for painting! NOTEPaint contains an anti-rot biocide - symbol: CAUTION SPECIFICATION FUNCTION Decorative paint for interior and exterior use COLOUR TONE Colourless and yellow-green luminescent DENSITY 1,35 g/l LAYER 100 my dried film CONSUMPTION 2-3 sqm / liter depending on the application APPLICATION water thinnable 10 SPRAYABLE Versions for brushing and spraying APPLICATION 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 12 hours WATERPROOF 48 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up paint within 6 months - stir up sediment!

Content: 0.375 Liter (€77.07* / 1 Liter)

€28.90*

Airbrush Colours blue transparent

Field of application Airbrush Colours Luminous Spray Paint Blue Water based Airbrush Colours Luminous Spray Colours are for spraying with the spray gun for smooth and absorbent surfaces. These airbrush colors luminous spray paints are air-drying and is after drying waterproof and chemical resistant and therefore also overpaintable with solvent varnish. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow water-based airbrush paint spray paint luminous for spraying with the spray gun for smooth and absorbent surfaces. Optimized for 0.3 nozzle for painting films, sheets and fabrics made of acrylic, PVC, PET, PA and glass BRIEF DESCRIPTIONColuxGlow airbrush paint spray paint luminous does not adhere to pure PE, PP and aluminum. This paint is air drying and is waterproof and chemical resistant after drying and can therefore also be painted over with solvent-based paint. APPLICATION ■ It is advisable to shake the spray paint before use. The nozzle should preferably have a size of 0.5 mm. Set the cup gun or suction tube guns with pressure setting of about 2 bar. ■ The paint is ready to spray. Thinning, if necessary, is possible by adding a special thinner. The ColuxGlow thinner is a thickened humectant! Do not dilute with water. Water separates the pigments from the system. ■ Fresh paint residue in the spray gun can be easily removed with water or methylated spirit and commercially available airbrush cleaner. Dried residues can be briefly dissolved on the dry tool with acetone or ethyl acetate and removed by rinsing thoroughly with water. ■ Do not add acid cleaners to liquid paint because an acid-base reaction and curing may occur in the tool. NOTEProtect containers from frost! SPECIFICATION FUNCTION Aribrush and cup gun COLOUR TONE transparent yellow-green or blue luminous DENSITY 1,3 g/l LAYER 30 my dried film CONSUMPTION 10 sqm / liter multilayer APPLICATION dilutable with Coluxglow Thinner SPRAYABLE for spraying from 0.3 nozzle PROCESSING 10-25 degrees C DRY TIME DUST DRY 2 hours Recoatable 12 hours WATERPROOF 24 hours PACKAGING Bottle 250 ml SHELF LIFE 1 year Storage stability, protect from frost, shake up before use

Content: 0.2 Liter (€98.00* / 1 Liter)

€19.60*

Airbrush paint yellow green transparent

Field of application Airbrush paint yellow green Spray Paint transparent Water based spray paint transparent for spraying with the spray gun for smooth and absorbent surfaces. This transparent spray paint is air-drying and is waterproof and chemical-resistant after drying and can therefore also be painted over with solvent-based varnish. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow water-based airbrush paint spray paint transparent for spraying with the spray gun for smooth and absorbent surfaces. Optimized for 0.3 nozzle for painting films, sheets and fabrics made of acrylic, PVC, PET, PA and glass BRIEF DESCRIPTIONColuxGlow Airbrushfarbe Spprühfarbe leuchtend does not adhere to pure PE, PP and aluminum. This paint is air drying and is waterproof and chemical resistant after drying and can therefore also be painted over with solvent-based paint. APPLICATION ■ It is advisable to shake the spray paint before use. The nozzle should preferably have a size of 0.5 mm. Set the cup gun or suction tube guns with pressure setting of about 2 bar. ■ The paint is ready to spray. Thinning, if necessary, is possible by adding a special thinner. The ColuxGlow thinner is a thickened humectant! Do not dilute with water. Water separates the pigments from the system. ■ Fresh paint residue in the spray gun can be easily removed with water or methylated spirit and commercially available airbrush cleaner. Dried residues can be briefly dissolved on the dry tool with acetone or ethyl acetate and removed by rinsing thoroughly with water. ■ Do not add acid cleaners to liquid paint because an acid-base reaction and curing may occur in the tool. NOTEProtect containers from frost! SPECIFICATION FUNCTION Aribrush and cup gun COLOUR TONE transparent yellow-green or blue luminous DENSITY 1,3 g/l LAYER 30 my dried film CONSUMPTION 10 sqm / liter multilayer APPLICATION dilutable with Coluxglow Thinner SPRAYABLE for spraying from 0.3 nozzle PROCESSING 10-25 degrees C DRY TIME DUST DRY 2 hours Recoatable 12 hours WATERPROOF 24 hours PACKAGING Bottle 250 ml SHELF LIFE 1 year Storage stability, protect from frost, shake up before use

Content: 0.2 Liter (€98.00* / 1 Liter)

€19.60*

Textildruckfarbe Siebdruck selbstleuchtende

Screen Printing Ink - Textile Red

Filling: 200 ml

Field of application Textile printing ink red ColuxGlow self-luminous screen printing inks Water based self-luminous screen printing inks for printing on cotton and synthetic fabrics made of polyester, nylon. WHAT CAN COLUXGLOW INK DO? ColuxGlow self-luminous screen printing inks textile is a water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon. BRIEF DESCRIPTIONColuxGlow water-based ink system self-luminous screen printing inks are free of gasoline, solvents and formaldehyde. Contains no banned substances according to Ökotex Standard and is free from THM Annex 38.APPLICATION ■ ColuxGlow textile is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at 150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Coloured photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / litre APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use.

Content: 0.2 Liter (€98.75* / 1 Liter)

€19.75*

Textilmalfarbe Stoffmalfarbe leuchtet gelbgrün

Screen printing ink afterglow yellow green Textile printing ink

Filling: 200 ml

Field of application Afterglow Textile Printing Ink yellow green ColuxGlow Screen Printing Ink Water based afterglow textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon. The water-based afterglow textile printing ink is free of petrol, solvents and formaldehyde. Contains no banned substances according to Ökotex standard and is free from THM annex 38. WHAT CAN COLUXGLOW INK DO? ColuxGlow afterglow textile printing ink is a water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon.BRIEF DESCRIPTIONColuxGlow water-based ink system afterglow textile printing ink, free of petrol, solvents and formaldehyde. Contains no banned substances according to Ökotex standard and is free from THM Annex 38.APPLICATION ■ ColuxGlow textile is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at 150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE transparent yellow-green photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / liter APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use.

Content: 0.2 Liter (€98.75* / 1 Liter)

€19.75*

Textil Malfarbe leuchtet blau transparent

Screen printing ink cardboard film transparent blue luminous stickers

Filling: 200 ml

Field of application Screen printing ink cardboard film transparent blue ColuxGlow Screen printing ink for luminous stickers Water-based screen printing and coating ink for films, sheets and fabrics made of plastic as well as cardboard and screen printing ink for luminous stickers. WHAT CAN COLUXGLOW INK DO? ColuxGlow water-based screen printing ink for luminous stickers, films, sheets and fabrics made of plastic as well as cardboard. BRIEF DESCRIPTIONColuxGlow water based screen printing ink for printing on absorbent substrates on cardboard, films, sheets and fabrics made of PMMA, PVC, PET, PA as well as absorbent pre-coated films, aluminium and glass in flatbed screen printing and rotary screen printing. APPLICATION ■ Prints made with ColuxGlow are waterproof and resistant to chemicals after drying■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. Water-resistant screen emulsions must be used to produce the printing stencils. Classic permanent stencils are also suitable. ■ ColuxGlow dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in the dryer. Drying time depends on the absorbency of the substrate. ■ No further fixing step is necessary. NOTEFresh ink residues in the screen can be easily removed with water. Dried residues are briefly dissolved from the dry screen with ethyl acetate and washed out with vinegar-water. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Colourless transparent and blue luminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / liter APPLICATION not dilutable, for cardboard and PMMA, PVC, PET, Nylon e.g. for label printing and stickers PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying - no fixing DRYING TIME PRINTING 15-20 min. UNDERPRINTING/ OVERPRINTING no plastisol STABLE 60 min. PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use. Protect from frost.

Content: 0.2 Liter (€99.25* / 1 Liter)

€19.85*

Siebdruck Farbe Folie PVC leuchtende Sticker

Screen Printing Ink Cardboard Foil Green - Bright Stickers

Filling: 200 ml

Application Screen Printing Ink Cardboard Film Green ColuxGlow Screen Printing Ink for Luminous Ink for Stickers Water based screen printing and coating ink for foils, sheets and fabrics made of plastic as well as cardboard luminous paint for stickers WHAT CAN COLUXGLOW INK DO? ColuxGlow water-based screen printing ink luminous paint for stickers, foils, sheets and fabrics made of plastic as well as cardboard. BRIEF DESCRIPTIONColuxGlow water based screen printing ink for printing on absorbent substrates on cardboard, films, sheets and fabrics made of PMMA, PVC, PET, PA as well as absorbent pre-coated films, aluminium and glass in flatbed screen printing and rotary screen printing. APPLICATION ■ Prints made with ColuxGlow are waterproof and resistant to chemicals after drying■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. Water-resistant screen emulsions must be used to produce the printing stencils. Classic permanent stencils are also suitable. ■ ColuxGlow dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in the dryer. Drying time depends on the absorbency of the substrate. ■ No further fixing step is necessary. NOTEFresh ink residues in the screen can be easily removed with water. Dried residues are briefly dissolved from the dry screen with ethyl acetate and washed out with vinegar-water. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Green and green luminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / liter APPLICATION not dilutable, for cardboard and PMMA, PVC, PET, Nylon e.g. for label printing and stickers PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying - no fixing DRYING TIME PRINTING 15-20 min. UNDERPRINTING/ OVERPRINTING no plastisol STABLE 60 min. PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use. Protect from frost.

Content: 0.2 Liter (€99.25* / 1 Liter)

€19.85*

Siebdruckfarbe für Karton und Folie phosphorisierend

Screen printing ink cardboard foil neon yellow - photoluminescent labels

Filling: 200 ml

Field of application Screen printing ink cardboard foil neon yellow ColuxGlow Screen printing ink neon yellow for printing afterglow labels Water-based screen printing and coating ink neon yellow for afterglow labels made of foils, sheets and fabrics made of plastic as well as cardboard. WHAT CAN COLUXGLOW INK DO? ColuxGlow water-based screen printing ink Neon Yellow for afterglow labels, foils, plates and fabrics made of plastic as well as cardboard. BRIEF DESCRIPTIONColuxGlow water based screen printing ink for printing on absorbent substrates on cardboard, films, sheets and fabrics made of PMMA, PVC, PET, PA as well as absorbent, pre-coated films, aluminium and glass in flatbed screen printing and rotary screen printing. APPLICATION ■ Prints made with ColuxGlow are waterproof and resistant to chemicals after drying■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. Water-resistant screen emulsions must be used to produce the printing stencils. Classic permanent stencils are also suitable. ■ ColuxGlow dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in the dryer. Drying time depends on the absorbency of the substrate. ■ No further fixing step is necessary. NOTEFresh ink residues in the screen can be easily removed with water. Dried residues are briefly dissolved from the dry screen with ethyl acetate and washed out with vinegar-water. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Neon yellow and yellow green luminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / liter APPLICATION not dilutable, for cardboard and PMMA, PVC, PET, nylon e.g. for label printing and stickers PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying - no fixing DRYING TIME PRINTING 15-20 min. UNDERPRINTING/ OVERPRINTING no plastisol STABLE 60 min. PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use. Protect from frost.

Content: 0.2 Liter (€99.25* / 1 Liter)

€19.85*

Screen printing ink cardboard foil yellow green transparent

Filling: 200 ml

Field of application Screen printing ink cardboard film transparent yellow-green ColuxGlow glow-in-the-dark screen printing ink Water-based glow-in-the-dark screen printing ink and coating ink for films, sheets and fabrics made of plastic as well as cardboard. WHAT CAN COLUXGLOW INK DO? ColuxGlow water-based glow-in-the-dark screen printing ink for luminous stickers, films, sheets and fabrics made of plastic as well as cardboard. BRIEF DESCRIPTIONColuxGlow water-based screen printing ink for printing on absorbent substrates on cardboard, films, sheets and fabrics made of PMMA, PVC, PET, PA as well as absorbent, pre-coated films, aluminium and glass in flatbed screen printing and rotary screen printing. APPLICATION ■ Prints made with ColuxGlow are waterproof and resistant to chemicals after drying■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. Water-resistant screen emulsions must be used to produce the printing stencils. Classic permanent stencils are also suitable. ■ ColuxGlow dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in the dryer. Drying time depends on the absorbency of the substrate. ■ No further fixing step is necessary. NOTEFresh ink residues in the screen can be easily removed with water. Dried residues are briefly dissolved from the dry screen with ethyl acetate and washed out with vinegar-water. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Colourless transparent and green luminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / liter APPLICATION not dilutable, for cardboard and PMMA, PVC, PET, nylon e.g. for label printing and stickers PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying - no fixing DRYING TIME PRINTING 15-20 min. UNDERPRINTING/ OVERPRINTING no plastisol STABLE 60 min. PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use. Protect from frost.

Content: 0.2 Liter (€99.25* / 1 Liter)

€19.85*

Screen printing ink textile 5 SET

Field of application Textile printing ink SET 5 x 100 ml ColuxGlow screen printing ink for glow-in-the-dark T-shirt do-it-yourself Water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon and viscose to make your own glow-in-the-dark T-shirt. WHAT CAN COLUXGLOW INK DO? ColuxGlow afterglow screen printing ink textile is a water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon and viscose. BRIEF DESCRIPTIONColuxGlow water-based ink system to make afterglow t-shirt yourself, free of petrol, solvents and formaldehyde. Contains no banned substances according to Ökotex Standard and is free of THM Annex 38.APPLICATION ■ ColuxGlow Textil is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at 150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Coloured photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / liter APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 100 ml cans SHELF LIFE Use up ink within 12 months - stir before use.

Content: 0.5 Liter (€93.20* / 1 Liter)

€46.60*

Screen Printing Ink Textile Blue

Filling: 200 ml

Field of application Textile Printing Ink BlueColuxGlow Afterglow Screen Printing Ink that glows Water based screen printing ink that glows for printing on cotton and synthetic fabrics made of polyester, nylon . WHAT CAN COLUXGLOW INK DO? ColuxGlow screen printing ink that glows is a water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon.BRIEF DESCRIPTIONColuxGlow water-based ink system screen printing ink that glows is free of petrol, solvents and formaldehyde. Contains no banned substances according to Ökotex Standard and is free from THM Annex 38.APPLICATION ■ ColuxGlow textile is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at 150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Coloured photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / liter APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use.

Content: 0.2 Liter (€98.75* / 1 Liter)

€19.75*

Screen printing ink textile blue transparent

Filling: 200 ml

Field of application ColuxGlow Screen Printing Ink Textile afterglow blue transparent Water based screen printing ink textile afterglow blue for printing on cotton and synthetic fabrics made of polyester, nylon. WHAT CAN COLUXGLOW INK DO? ColuxGlow afterglow screen printing ink textile is a water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon.BRIEF DESCRIPTIONColuxGlow water-based ink system afterglow screen printing ink textile, free of petrol, solvents and formaldehyde. Contains no banned substances according to Ökotex standard and is free from THM Annex 38.APPLICATION ■ ColuxGlow textile is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at 150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE transparent blue photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / litre APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use.

Content: 0.2 Liter (€98.75* / 1 Liter)

€19.75*

Screen Printing Ink Textile Green

Filling: 200 ml

Field of application Textile printing ink green ColuxGlow with screen printing ink photoluminescent Water based screen printing ink photoluminescent for printing on cotton and synthetic fabrics made of polyester, nylon. WHAT CAN COLUXGLOW INK DO? ColuxGlow screen printing ink photoluminescent textile is a water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon.BRIEF DESCRIPTIONColuxGlow water-based ink system screen printing ink photoluminescent are free of gasoline, solvents and formaldehyde. Contains no prohibited substances according to Ökotex Standard and is free from THM Annex 38.APPLICATION ■ ColuxGlow textile is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at 150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Coloured photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / liter APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use.

Content: 0.2 Liter (€98.75* / 1 Liter)

€19.75*

Screen Printing Ink Textile Pink

Filling: 200 ml

Field of application Textile printing ink Pink ColuxGlow Screen printing ink Colour that glows at night Water based textile printing ink - screen printing ink colour that glows at night for printing on cotton and synthetic fabrics made of polyester, nylon. WHAT CAN COLUXGLOW INK DO? ColuxGlow screen printing ink that glows at night for textile is a water based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon . BRIEF DESCRIPTIONColuxGlow water based ink system screen printing inks that glow at night are free of petrol, solvents and formaldehyde. Contains no banned substances according to Ökotex Standard and is free from THM Annex 38.APPLICATION ■ ColuxGlow textile is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at 150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Coloured photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / liter APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use.

Content: 0.2 Liter (€98.75* / 1 Liter)

€19.75*

Screen printing ink textile yellow luminous

Filling: 200 ml

Field of application Textile Printing Ink Yellow ColuxGlow Screen Printing Ink yellow luminous Water based textile printing ink yellow luminous for printing on cotton and synthetic fabrics made of polyester, nylon. WHAT CAN COLUXGLOW INK DO? ColuxGlow screen printing ink yellow luminescent textile is a water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon.BRIEF DESCRIPTIONColuxGlow water-based ink system screen printing ink yellow luminescent is free of gasoline, solvents and formaldehyde. Contains no prohibited substances according to Ökotex Standard and is free from THM Annex 38.APPLICATION ■ ColuxGlow textile is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at 150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Coloured photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / litre APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use.

Content: 0.2 Liter (€98.75* / 1 Liter)

€19.75*

Textile paint blue

Field of application Textile Paint Blue ColuxGlow Textile Acrylic Paint nightglow glows 3-fold The water-based textile acrylic paint nightglow is suitable for light fabrics made of untreated cotton as well as synthetic fabrics made of polyester, nylon and mixed fabrics with elastane. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow textile acrylic paint nightglow is suitable for light-coloured fabrics made of untreated cotton as well as synthetic fabrics made of polyester, nylon and mixed fabrics with elastane. SHORT DESCRIPTIONColuxGlow Textile Acrylic Paint nightglow is easy to paint. The four basic colours yellow, red, green and blue can be mixed with each other. For textiles that will be washed, a heat fixation is necessary. APPLICATION ■ Do not add water! ■ The results are permanent and wash-resistant up to 60 ° C after fixation, also suitable for dry cleaning. ■ Use a bristle brush or fine sponge to apply the paint. When using the brush, do not overdo the paint. Too much will result in stained and brittle areas. It's better to apply the paint gradually, layer by layer, such as by tapping or dabbing, rather than with a thick application of paint. ■ Hot fix: Let your painted color design dry at room temperature for at least 60 minutes. Before you can wear the T-shirt, it must be heat set. To do this, iron the design for 1-2 minutes at full heat with baking paper overlay to protect the design from the hot ironing surface. NOTEFor painting colored pictures and with the transparent colorless colors generally no fixation is necessary! SPECIFICATION FUNCTION Artist's painting colour COLOUR TONE coloured luminescent DENSITY 1,2 g/l LAYER 10-20 my dried film CONSUMPTION thin layers for textiles APPLICATION not dilutable - 60 degrees C washable after fixation! SPRITTABLE Versions for painting and stenciling PROCESSING Room temperature DRY TIME DUST DRY 5 hours PAINTABLE 5 hours WATERPROOF 12 hours PACKAGING Tins 100, 200 ml SHELF LIFE good shelf life with lid closed

Content: 0.2 Liter (€97.50* / 1 Liter)

€19.50*

Textile paint glows blue transparent

Filling: 100 ml

Textile Paint blue transparent ColuxGlow Textile Paint glows The water-based textile paint glows and is suitable for light fabrics made of untreated cotton as well as synthetic fabrics made of polyester, nylon and mixed fabrics with elastane. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow textile paint glows blue is suitable for light-coloured fabrics made of untreated cotton as well as synthetic fabrics made of polyester, nylon and mixed fabrics with elastane. BRIEF DESCRIPTIONColuxGlow Textile Paint Glows Blue is easy to paint. The four basic colours yellow, red, green and blue can be mixed with each other. For textiles that will be washed, heat fixation is required. APPLICATION ■ Do not add water! ■ The results are permanent and wash-resistant up to 60 ° C after fixation, also suitable for dry cleaning. ■ Use a bristle brush or fine sponge to apply the paint. When using the brush, do not overdo the paint. Too much will result in stained and brittle areas. It's better to apply the paint gradually, layer by layer, such as by tapping or dabbing, rather than with a thick application of paint. ■ Hot fix: Let your painted color design dry at room temperature for at least 60 minutes. Before you can wear the T-shirt, it must be heat set. To do this, iron the design for 1-2 minutes at full heat with baking paper overlay to protect the design from the hot ironing surface. NOTEFor painting colored pictures and with the transparent colorless colors generally no fixation is necessary! SPECIFICATION FUNCTION Artist's painting colour COLOUR TONE transparent blue luminescent DENSITY 1,2 g/l LAYER 10-20 my dried film CONSUMPTION thin layers for textiles APPLICATION not dilutable - 60 degrees C wash resistant after fixation! SPRITTABLE Versions for painting and stenciling PROCESSING Room temperature DRY TIME DUST DRY 5 hours PAINTABLE 5 hours WATERPROOF 12 hours PACKAGING Tins 100, 200 ml SHELF LIFE good shelf life with lid closed.

Content: 0.1 Liter (€125.00* / 1 Liter)

€12.50*

Textile paint green

Field of application Textile Paint Green ColuxGlow Self-Luminous Colours The water-based self-luminous paint is suitable for light-coloured fabrics made of untreated cotton as well as synthetic fabrics made of polyester, nylon and mixed fabrics with elastane. WHAT CAN COLUXGLOW DYE DO? ColuxGlow textile self-luminous inks are suitable for light-coloured fabrics made of untreated cotton as well as synthetic fabrics made of polyester, nylon and mixed fabrics with elastane. SHORT DESCRIPTIONColuxGlow textile self-luminous paints are easy to paint. The four basic colours yellow, red, green and blue can be mixed with each other. For textiles that will be washed, heat fixation is required. APPLICATION ■ Do not add water! ■ The results are permanent and wash-resistant up to 60 ° C after fixation, also suitable for dry cleaning. ■ Use a bristle brush or fine sponge to apply the paint. When using the brush, do not overdo the paint. Too much will result in stained and brittle areas. It's better to apply the paint gradually, layer by layer, such as by tapping or dabbing, rather than with a thick application of paint. ■ Hot fix: Let your painted color design dry at room temperature for at least 60 minutes. Before you can wear the T-shirt, it must be heat set. To do this, iron the design for 1-2 minutes at full heat with baking paper overlay to protect the design from the hot ironing surface. NOTEFor painting colored pictures and with the transparent colorless colors generally no fixation is necessary! SPECIFICATION FUNCTION Artist's painting colour COLOUR TONE coloured luminescent DENSITY 1,2 g/l LAYER 10-20 my dried film CONSUMPTION thin layers for textiles APPLICATION not dilutable - 60 degrees C washable after fixation! SPRITTABLE Versions for painting and stenciling PROCESSING Room temperature DRY TIME DUST DRY 5 hours PAINTABLE 5 hours WATERPROOF 12 hours PACKAGING Tins 100, 200 ml SHELF LIFE good shelf life with lid closed

Content: 0.2 Liter (€97.50* / 1 Liter)

€19.50*

Textile paint red

Field of application Textile Paint Red ColuxGlow Textile Paint bright The water-based textile paint luminous is suitable for light fabrics made of untreated cotton as well as synthetic fabrics made of polyester, nylon and mixed fabrics with elastane. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow textile dye luminous is suitable for light-coloured fabrics made of untreated cotton as well as synthetic fabrics made of polyester, nylon and mixed fabrics with elastane. SHORT DESCRIPTIONColuxGlow textile dye luminous is easy to paint. The four basic colours yellow, red, green and blue can be mixed with each other. For textiles that will be washed, a heat fixation is necessary. APPLICATION ■ Do not add water! ■ The results are permanent and wash-resistant up to 60 ° C after fixation, also suitable for dry cleaning. ■ Use a bristle brush or fine sponge to apply the paint. When using the brush, do not overdo the paint. Too much will result in stained and brittle areas. It's better to apply the paint gradually, layer by layer, such as by tapping or dabbing, rather than with a thick application of paint. ■ Hot fix: Let your painted color design dry at room temperature for at least 60 minutes. Before you can wear the T-shirt, it must be heat set. To do this, iron the design for 1-2 minutes at full heat with baking paper overlay to protect the design from the hot ironing surface. NOTEFor painting colored pictures and with the transparent colorless colors generally no fixation is necessary! SPECIFICATION FUNCTION Artist's painting colour COLOUR TONE coloured luminescent DENSITY 1,2 g/l LAYER 10-20 my dried film CONSUMPTION thin layers for textiles APPLICATION not dilutable - 60 degrees C wash resistant after fixation! SPRITTABLE Versions for painting and stenciling PROCESSING Room temperature DRY TIME DUST DRY 5 hours PAINTABLE 5 hours WATERPROOF 12 hours PACKAGING Tins 100, 200 ml SHELF LIFE good shelf life with lid closed.

Content: 0.2 Liter (€95.05* / 1 Liter)

€19.01*

Textile paint SET 4er

Field of application Fabric painting colour SET 4x100 ml ColuxGlow painting colour glows is wash-resistant wash-resistant The fabric paint is wash-resistant and is suitable for light-coloured fabrics made of untreated cotton as well as synthetic fabrics made of polyester, nylon and mixed fabrics with elastane. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow textile paint wash-resistant is suitable for light-coloured fabrics made of untreated cotton as well as synthetic fabrics made of polyester, nylon and mixed fabrics with elastane. SHORT DESCRIPTIONColuxGlow Textile Stain wash-resistant is easy to paint. The four basic colours yellow, red, green and blue can be mixed with each other. For textiles that will be washed, a heat fixation is necessary. APPLICATION ■ Do not add water! ■ The results are permanent and wash-resistant up to 60 ° C after fixation, also suitable for dry cleaning. ■ Use a bristle brush or fine sponge to apply the paint. When using the brush, do not overdo the paint. Too much will result in stained and brittle areas. It's better to apply the paint gradually, layer by layer, such as by tapping or dabbing, rather than with a thick application of paint. ■ Hot fix: Let your painted color design dry at room temperature for at least 60 minutes. Before you can wear the T-shirt, it must be heat set. To do this, iron the design for 1-2 minutes at full heat with baking paper overlay to protect the design from the hot ironing surface. NOTEFor painting colored pictures and with the transparent colorless colors generally no fixation is necessary! SPECIFICATION FUNCTION Artist's painting colour COLOUR TONE coloured luminescent DENSITY 1,2 g/l LAYER 10-20 my dried film CONSUMPTION thin layers for textiles APPLICATION not dilutable - 60 degrees C wash resistant after fixation! SPRITTABLE Versions for painting and stenciling PROCESSING Room temperature DRY TIME DUST DRY 5 hours PAINTABLE 5 hours WATERPROOF 12 hours PACKAGING Tins 100, 200 ml SHELF LIFE good shelf life with lid closed.

Content: 0.4 Liter (€99.75* / 1 Liter)

€39.90*

Textile paint yellow

Field of application Textile Paint Yellow ColuxGlow Washable is 3-times luminous and washable up to 60 degrees Celsius The water-based paint washable is suitable for light fabrics made of untreated cotton as well as synthetic fabrics made of polyester, nylon and mixed fabrics with elastane and is washable. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow textile paint washable is suitable for light-coloured fabrics made of untreated cotton as well as synthetic fabrics made of polyester, nylon and mixed fabrics with elastane. SHORT DESCRIPTIONColuxGlow Textile Stain washable is easy to paint. The four basic colours yellow, red, green and blue can be mixed with each other. For textiles that are washed, a heat fixation is necessary. APPLICATION ■ Do not add water! ■ The results are permanent and wash-resistant up to 60 ° C after fixation, also suitable for dry cleaning. ■ Use a bristle brush or fine sponge to apply the paint. When using the brush, do not overdo the paint. Too much will result in stained and brittle areas. It's better to apply the paint gradually, layer by layer, such as by tapping or dabbing, rather than with a thick application of paint. ■ Hot fix: Let your painted color design dry at room temperature for at least 60 minutes. Before you can wear the T-shirt, it must be heat set. To do this, iron the design for 1-2 minutes at full heat with baking paper overlay to protect the design from the hot ironing surface. NOTEFor painting colored pictures and with the transparent colorless colors generally no fixation is necessary! SPECIFICATION FUNCTION Artist's painting colour COLOUR TONE coloured luminescent DENSITY 1,2 g/l LAYER 10-20 my dried film CONSUMPTION thin layers for textiles APPLICATION not dilutable - 60 degrees C wash resistant after fixation! SPRITTABLE Versions for painting and stenciling PROCESSING Room temperature DRY TIME DUST DRY 5 hours PAINTABLE 5 hours WATERPROOF 12 hours PACKAGING Tins 100, 200 ml SHELF LIFE good shelf life with lid closed.

Content: 0.2 Liter (€97.50* / 1 Liter)

€19.50*

Textile Stain yellow green transparent

Filling: 100 ml

Field of application Fabric Paint yellow green transparent ColuxGlow Fabric Paint glows The water-based fabric paint is suitable for light-coloured fabrics made of untreated cotton as well as synthetic fabrics made of polyester, nylon and mixed fabrics with elastane. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow textile fabric paint glows yellow-green is suitable for light-coloured fabrics made of untreated cotton as well as synthetic fabrics made of polyester, nylon and mixed fabrics with elastane. SHORT DESCRIPTIONColuxGlow Fabric Paint Glows Yellow Green is easy to paint. The four basic colours yellow, red, green and blue can be mixed with each other. For textiles that will be washed, heat fixation is required. APPLICATION ■ Do not add water! ■ The results are permanent and wash-resistant up to 60 ° C after fixation, also suitable for dry cleaning. ■ Use a bristle brush or fine sponge to apply the paint. When using the brush, do not overdo the paint. Too much will result in stained and brittle areas. It's better to apply the paint gradually, layer by layer, such as by tapping or dabbing, rather than with a thick application of paint. ■ Hot fix: Let your painted color design dry at room temperature for at least 60 minutes. Before you can wear the T-shirt, it must be heat set. To do this, iron the design for 1-2 minutes at full heat with baking paper overlay to protect the design from the hot ironing surface. NOTEFor painting colored pictures and with the transparent colorless colors generally no fixation is necessary! SPECIFICATION FUNCTION Artist's painting colour COLOUR TONE transparent yellow-green luminescent DENSITY 1,2 g/l LAYER 10-20 my dried film CONSUMPTION thin layers for textiles APPLICATION not dilutable - 60 degrees C wash resistant after fixation! SPRITTABLE Versions for painting and stenciling PROCESSING Room temperature DRY TIME DUST DRY 5 hours PAINTABLE 5 hours WATERPROOF 12 hours PACKAGING Tins 100, 200 ml SHELF LIFE good shelf life with lid closed.

Content: 0.1 Liter (€125.00* / 1 Liter)

€12.50*

Thinner Retarder Artists' Colours

Thinner - Retarder for artist colours afterglow For use in the following ColuxGlow artists' colours afterglow: Airbrush paint - Painting colours - Textile painting colours - Screen printing colours We recommend the thinner retarder for the afterglow artist colours if the colours have been stored for a longer period of time and thicken a little or if they need an increased flowing property in your printing process. Water is generally not recommended!

Content: 0.25 Liter (€11.96* / 1 Liter)

€2.99*

Artists and screen printing self-luminous luminous acrylic paints for painting, painting, spraying, airbrush and screen printing