Wall marking paint on doors and walls for escape route identification and safety signs according to ASR on office floors, stairwells in industrial buildings or large residential buildings for emergency exits.
Alternatively, we recommend using the spray can with the stencil on the concrete wall or for metal doors.
Field of application
Test certificate based on the DIN 67510 standard for photoluminescent markings
Test certificate of the luminance measurement from the product standard for photoluminescent markings
Creation of a test certificate from a laboratory order in accordance with DIN 67510-4 with the values of the luminance measurement and luminous duration determination for photoluminescent markings. The photoluminescent products tested in this way show the results in relation to the specifications of ASR A3.4/7 and DIN 67510-4 Class B or C and can be assigned accordingly.
ASR A3.4/7 : Workplace safety
Class B: For better orientation on escape and rescue routes in the dark
Class C: If no sufficient safety lighting is available as well as for the installation of photoluminescent markings for optical safety guidance systems.
Type and scope of service
Scope of services: Testing of the reset pattern from the standard or from the special design.
Additional service: Testing of one of the customer's objects that you make available to us for measurement.
ESCAPE ROUTE SIGNS SELF-ADHESIVE TRANSPARENTOrafol self-adhesive escape route signs 90 x 180 mm in three different directions: Piecewise arrow to the right, left and straight ahead. Photoluminescent escape route signs in combination with wall marking colour and guidelines 10 cm wide.
Field of application
Wall Marking Paint Yellow ColuxGlow
self-luminous paint wall marking paint yellow made of aqueous acrylate base
WHAT CAN COLUXGLOW PAINT DO?
ColuxGlow Self-Luminous Paint Wall Marking Paint Yellow is a paint for marking walls and doors with a photoluminescent effect.
BRIEF DESCRIPTIONColuxGlow Self-Luminous Paint Wall Marking Paint Yellow is a water-based acrylic paint with a high content of afterglow pigments that store light energy and release it over time. A white undercoat is recommended to achieve a good luminescent effect. APPLICATION ■ The substrate must be clean and dry - a white primer significantly increases the luminous effect, because the luminescent paint is translucent. ■ Depending on the application technique, especially for the spraying process, it can be thinned with up to 10 % quantity of demineralised water. In this case, also stir during painting in order to avoid settling of the pigments. ■ Before the coating dries, remove any masking tape that may have been used so that no film edge is formed during curing. ■ TIP: Do not use an absorbent brush or paint roller for painting! NOTEPaint contains an anti-rot biocide - symbol: CAUTION
SPECIFICATION
FUNCTION
Safety marking
COLOR TONE
Yellow and yellow-green photoluminescent
DENSITY
1,35 g/l
LAYER
100 my dried film
CONSUMPTION
2-3 sqm / liter depending on the application
APPLICATION
water thinnable 10
SPRAYABLE
Versions for brushing and spraying
APPLICATION
10-25 degrees C
DRY TIME
DUST DRY
2 hours
PAINTABLE
12 hours
WATERPROOF
48 hours
PACKAGING
375 ml and 1 litre cans
SHELF LIFE
Use up paint within 6 months - stir up sediment!
Field of application
afterglow wall marking paint yellow green ColuxGlow luminous wall paint on watery acrylate base
WHAT CAN COLUXGLOW PAINT DO?
ColuxGlow afterglow wall marking paint is a paint for marking walls and doors with a photoluminescent effect.
BRIEF DESCRIPTIONColuxGlow photoluminescent wall marking paint is a water-based luminescent acrylic wall paint with a high content of photoluminescent pigments that store light energy and release it over time. A white undercoat is recommended to achieve a good luminescent effect. APPLICATION ■ The substrate must be clean and dry - a white primer significantly increases the luminous effect, because the luminous paint is translucent. ■ Depending on the application technique, especially for the spraying process, it can be thinned with up to 10 % quantity of demineralised water. In this case, also stir during painting in order to avoid settling of the pigments. ■ Before the coating dries, remove any masking tape that may have been used so that no film edge is formed during curing. ■ TIP: Do not use an absorbent brush or paint roller for painting! NOTEPaint contains an anti-rot biocide - symbol: CAUTION
SPECIFICATION
FUNCTION
Safety marking
COLOR TONE
yellow-green photoluminescent
DENSITY
1,35 g/l
LAYER
100 my dried film
CONSUMPTION
2-3 sqm / liter depending on the application
APPLICATION
water thinnable 10
SPRAYABLE
Versions for brushing and spraying
APPLICATION
10-25 degrees C
DRY TIME
DUST DRY
2 hours
PAINTABLE
12 hours
WATERPROOF
48 hours
PACKAGING
375 ml and 1 litre cans
SHELF LIFE
Use up paint within 6 months - stir up sediment!
Content:
0.375 Liter
(€92.27* / 1 Liter)
€34.60*
Wall marking paint for escape route marking and safety marking of emergency exit on door and wall in staircase
Phone +49 6326 980094
Mo-Fr 9-16
1-3 Days 5,35€ (D)
This website uses cookies to ensure the best experience possible. More information...