Application area Acrylic paint blueColuxGlow self-luminous spray paint on watery acrylate base Version for spraying self-luminous spray paint WHAT CAN COLUXGLOW PAINT DO? ColuxGlow self-luminous spray paint is a paint for surfaces made of wood and pre-painted surfaces. BRIEF DESCRIPTIONColuxGlow Self-Luminous Spray Paint is a water-based acrylic paint with a high content of afterglow pigments that store and release light energy over time. A white undercoat is recommended to achieve a good luminescent effect. APPLICATION    ■ The substrate must be clean and dry - a white primer significantly increases the luminous effect, because the luminescent paint is translucent. ■ Depending on the application technique, especially for the spraying process, it can be thinned with up to 10 % quantity of demineralised water. In this case, also stir during painting in order to avoid settling of the pigments. ■ Before the coating dries, remove any masking tape that may have been used so that no film edge is formed during curing. ■ TIP: Do not use an absorbent brush or paint roller for painting! NOTEPaint contains an anti-rot biocide - symbol: CAUTION SPECIFICATION FUNCTION Decorative paint for interior and exterior use COLOUR TONE Colourless and blue luminescent DENSITY 1,35 g/l LAYER 100 my dried film CONSUMPTION 2-3 sqm / liter depending on the application APPLICATION water thinnable 10 SPRAYABLE Versions for brushing and spraying APPLICATION 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 12 hours WATERPROOF 48 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up paint within 6 months - stir up sediment!

Field of application Acrylic paint yellow greenColuxGlow phosphorescent marking spray paint  Paint for outdoor use Version for spraying phosphorescent marking spray paint color outdoor area WHAT CAN COLUXGLOW PAINT DO? ColuxGlow phosphorescent marking spray paint for exterior use and surfaces made of wood and pre-painted surfaces. BRIEF DESCRIPTIONColuxGlow phosphorescent outdoor marking spray paint is a water-based acrylic paint with a high percentage of afterglow pigments that store and release light energy over time. A white undercoat is recommended to achieve a good luminescent effect. APPLICATION    ■ The substrate must be clean and dry - a white primer significantly increases the luminous effect, because the luminescent paint is translucent. ■ Depending on the application technique, especially for the spraying process, it can be thinned with up to 10 % quantity of demineralised water. In this case, also stir during painting in order to avoid settling of the pigments. ■ Before the coating dries, remove any masking tape that may have been used so that no film edge is formed during curing. ■ TIP: Do not use an absorbent brush or paint roller for painting! NOTEPaint contains an anti-rot biocide - symbol: CAUTION SPECIFICATION FUNCTION Decorative paint for interior and exterior use COLOUR TONE Colourless and yellow-green luminescent DENSITY 1,35 g/l LAYER 100 my dried film CONSUMPTION 2-3 sqm / liter depending on the application APPLICATION water thinnable 10 SPRAYABLE Versions for brushing and spraying APPLICATION 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 12 hours WATERPROOF 48 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up paint within 6 months - stir up sediment!

Field of application Airbrush Colours Luminous Spray Paint Blue   Water based Airbrush Colours Luminous Spray Colours are for spraying with the spray gun for smooth and absorbent surfaces. These airbrush colors luminous spray paints are air-drying and is after drying waterproof and chemical resistant and therefore also overpaintable with solvent varnish. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow water-based airbrush paint spray paint luminous for spraying with the spray gun for smooth and absorbent surfaces. Optimized for 0.3 nozzle for painting films, sheets and fabrics made of acrylic, PVC, PET, PA and glass BRIEF DESCRIPTIONColuxGlow airbrush paint spray paint luminous does not adhere to pure PE, PP and aluminum. This paint is air drying and is waterproof and chemical resistant after drying and can therefore also be painted over with solvent-based paint. APPLICATION    ■ It is advisable to shake the spray paint before use. The nozzle should preferably have a size of 0.5 mm. Set the cup gun or suction tube guns with pressure setting of about 2 bar. ■ The paint is ready to spray. Thinning, if necessary, is possible by adding a special thinner. The ColuxGlow thinner is a thickened humectant! Do not dilute with water. Water separates the pigments from the system. ■ Fresh paint residue in the spray gun can be easily removed with water or methylated spirit and commercially available airbrush cleaner. Dried residues can be briefly dissolved on the dry tool with acetone or ethyl acetate and removed by rinsing thoroughly with water. ■ Do not add acid cleaners to liquid paint because an acid-base reaction and curing may occur in the tool. NOTEProtect containers from frost! SPECIFICATION FUNCTION Aribrush and cup gun COLOUR TONE transparent yellow-green or blue luminous DENSITY 1,3 g/l LAYER 30 my dried film CONSUMPTION 10 sqm / liter multilayer APPLICATION dilutable with Coluxglow Thinner SPRAYABLE for spraying from 0.3 nozzle PROCESSING 10-25 degrees C DRY TIME DUST DRY 2 hours Recoatable 12 hours WATERPROOF 24 hours PACKAGING Bottle 250 ml SHELF LIFE 1 year Storage stability, protect from frost, shake up before use

Field of application Airbrush paint yellow green Spray Paint transparent   Water based spray paint transparent for spraying with the spray gun for smooth and absorbent surfaces.   This transparent spray paint is air-drying and is waterproof and chemical-resistant after drying and can therefore also be painted over with solvent-based varnish. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow water-based airbrush paint spray paint transparent for spraying with the spray gun for smooth and absorbent surfaces. Optimized for 0.3 nozzle for painting films, sheets and fabrics made of acrylic, PVC, PET, PA and glass BRIEF DESCRIPTIONColuxGlow Airbrushfarbe Spprühfarbe leuchtend does not adhere to pure PE, PP and aluminum. This paint is air drying and is waterproof and chemical resistant after drying and can therefore also be painted over with solvent-based paint. APPLICATION    ■ It is advisable to shake the spray paint before use. The nozzle should preferably have a size of 0.5 mm. Set the cup gun or suction tube guns with pressure setting of about 2 bar. ■ The paint is ready to spray. Thinning, if necessary, is possible by adding a special thinner. The ColuxGlow thinner is a thickened humectant! Do not dilute with water. Water separates the pigments from the system. ■ Fresh paint residue in the spray gun can be easily removed with water or methylated spirit and commercially available airbrush cleaner. Dried residues can be briefly dissolved on the dry tool with acetone or ethyl acetate and removed by rinsing thoroughly with water. ■ Do not add acid cleaners to liquid paint because an acid-base reaction and curing may occur in the tool. NOTEProtect containers from frost! SPECIFICATION FUNCTION Aribrush and cup gun COLOUR TONE transparent yellow-green or blue luminous DENSITY 1,3 g/l LAYER 30 my dried film CONSUMPTION 10 sqm / liter multilayer APPLICATION dilutable with Coluxglow Thinner SPRAYABLE for spraying from 0.3 nozzle PROCESSING 10-25 degrees C DRY TIME DUST DRY 2 hours Recoatable 12 hours WATERPROOF 24 hours PACKAGING Bottle 250 ml SHELF LIFE 1 year Storage stability, protect from frost, shake up before use

Thinner - Retarder for artist colours afterglow For use in the following ColuxGlow artists' colours afterglow: Airbrush paint - Painting colours - Textile painting colours - Screen printing colours We recommend the thinner retarder for the afterglow artist colours if the colours have been stored for a longer period of time and thicken a little or if they need an increased flowing property in your printing process. Water is generally not recommended!