Field of application Acrylic Varnish blue ColuxGlow Acrylic Varnish Afterglow on solvent basis for interior + exterior use Acrylic Lacquer Afterglow for objects made of metal, wood and concrete in afterglow colour yellow-green or blue. Consumption: 250 ml approx. 0.5 sqm with brush or roller. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow acrylic paint afterglow paint for objects made of metal, wood and concrete in afterglow color yellow green or blue luminous. BRIEF DESCRIPTIONColuxGlow Acrylic Afterglow Varnish for alkaline surfaces made of concrete, screed and fibre cement in the interior directly apply e.g. for the floor. Metal and plastics require a primer. For utilitarian objects, overcoating with water-based varnish is recommended for scratch resistance. APPLICATION    ■ The substrate must be dry and free from loose particles. Remove grease, oil and paint residues from the substrate. Highly absorbent or dark-coloured substrates should be pre-primed with white lacquer. Do not use alkyd resin varnish for this purpose! ■ The varnish can be thinned with Nitro Universal Thinner. Brushes and tools can also be cleaned with ethanol (spirit). A hardened varnish can be removed with acetone. ■ (  ) Version for brush/roller: Apply with paint brush or mohair roller. The film dries without bubbles. No dripping time. ■ (  ) Version for spray technique: For application with a spray gun, dilute the lacquer 3:1 with Nitro Universal Thinner. The lacquer has a high solids content and therefore we recommend the largest possible nozzle diameter. NOTEContains :hydrocarbons, C9, aromatics, methyl methacrylateATTENTION, flammable, must not get into ground water. SPECIFICATION FUNCTION Solvent Decorative varnish COLOUR TONE transparent blue photoluminescent DENSITY 1,45 g/l LAYER 50 my dried film CONSUMPTION 2 sqm / liter depending on the application APPLICATION Dilutable with  Nitro thinner, redissolvable with acetone SPRAYABLE Versions for brushing and spraying APPLICATION VOC limit value: Anh.II A (i), Lb (2010):. max. 500 g/l. VOC content: <500 g/l DRY TIME DUST DRY 12 hours PAINTABLE 48 hours WATERPROOF 48 hours PACKAGING 125 ml and 250 ml cans SHELF LIFE Can be stored for more than 1 year. Stir up the sediment!

Field of application Acrylic varnish yellow-green ColuxGlow Acrylic varnish solvent base for interior + exterior use   Acrylic varnish solvent base for objects made of metal, wood and concrete in afterglow colour yellow green or blue. Consumption: 250 ml approx. 0.5 sqm with brush or roller. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow acrylic paints solvent base for objects made of metal, wood and concrete in afterglow color yellow green or blue luminous. BRIEF DESCRIPTIONColuxGlow acrylic paints solvent base for alkaline surfaces of concrete, screed and fiber cement in the interior directly apply e.g. for the floor. Metal and plastics require a primer. For utilitarian objects, overcoating with water-based varnish is recommended for scratch resistance. APPLICATION    ■ The substrate must be dry and free from loose particles. Remove grease, oil and paint residues from the substrate. Highly absorbent or dark-coloured substrates should be pre-primed with white lacquer. Do not use alkyd resin varnish for this purpose! ■ The varnish can be thinned with Nitro Universal Thinner. Brushes and tools can also be cleaned with ethanol (spirit). A hardened varnish can be removed with acetone. ■ (  ) Version for brush/roller: Apply with paint brush or mohair roller. The film dries without bubbles. No dripping time. ■ (  ) Version for spray technique: For application with a spray gun, dilute the lacquer 3:1 with Nitro Universal Thinner. The lacquer has a high solids content and therefore we recommend the largest possible nozzle diameter. NOTEContains :hydrocarbons, C9, aromatics, methyl methacrylateATTENTION, flammable, must not get into ground water. SPECIFICATION FUNCTION Solvent Decorative varnish COLOUR TONE transparent yellow green photoluminescent DENSITY 1,45 g/l LAYER 50 my dried film CONSUMPTION 2 sqm / liter depending on the application APPLICATION Dilutable with  Nitro thinner, redissolvable with acetone SPRAYABLE Versions for brushing and spraying APPLICATION VOC limit value: Anh.II A (i), Lb (2010):. max. 500 g/l. VOC content: <500 g/l DRY TIME DUST DRY 12 hours PAINTABLE 48 hours WATERPROOF 48 hours PACKAGING 125 ml and 250 ml cans SHELF LIFE Can be stored for more than 1 year. Stir up the sediment!

Field of application FACADE PAINT ColuxGlow clearly visible in the dark! Coating and spray paint based on silicate acrylic Coluxglow   Facade color colorless and bright blue WHAT CAN COLUXGLOW COLOR DO?ColuxGlow facade paint is a coating for outdoor areas, e.g. for wall surfaces made of concrete, screed, fiber cement and pre-painted facades.BRIEF DESCRIPTIONColuxGlow facade paint is a silicate acrylic paint with a high proportion of afterglow pigment that stores daylight and releases it again over time. A white primer is recommended to achieve a good lighting effect. The facade color is weatherproof and UV-resistant and clearly visible in the dark.APPLICATION■ The surface must be clean and dry - a white primer significantly increases the luminous effect, because the luminous paint is translucent.■ When spraying, stir occasionally, particularly during painting, to prevent the pigments from settling.■ Do not dilute the paint with water!■ The paint can be diluted with ethanol (methylated spirit).■ TIP: Do not use suction brushes/paint rollers or metal tools for painting, but paint brushes or a mohair roller!NOTICEPaint contains an anti-rot biocide. React mass: bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate and methyl1,2,2,6,6-pentamethyl-4-piperidyl sebacate – symbol: ATTENTION SPECIFICATION FUNCTION Facade, prepainted COLOUR TONE Colourless and yellowgreen luminescent DENSITY 1,35 g/l LAYER 100 my dried film CONSUMPTION 4 sqm / liter depending on the application APPLICATION ethanol thinnable SPRAYABLE Versions for brushing and spraying APPLICATION 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 12 hours WATERPROOF 12 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up paint within 6 months - stir up sediment!

Field of application FACADE PAINT ColuxGlow clearly visible in the dark! Coating and spray paint based on silicate acrylic Coluxglow   Facade color colorless and bright yellow-green WHAT CAN COLUXGLOW COLOR DO?ColuxGlow facade paint is a coating for outdoor areas, e.g. for wall surfaces made of concrete, screed, fiber cement and pre-painted facades.BRIEF DESCRIPTIONColuxGlow facade paint is a silicate acrylic paint with a high proportion of afterglow pigment that stores daylight and releases it again over time. A white primer is recommended to achieve a good lighting effect. The facade color is weatherproof and UV-resistant and clearly visible in the dark.APPLICATION■ The surface must be clean and dry - a white primer significantly increases the luminous effect, because the luminous paint is translucent.■ When spraying, stir occasionally, particularly during painting, to prevent the pigments from settling.■ Do not dilute the paint with water!■ The paint can be diluted with ethanol (methylated spirit).■ TIP: Do not use suction brushes/paint rollers or metal tools for painting, but paint brushes or a mohair roller!NOTICEPaint contains an anti-rot biocide. React mass: bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate and methyl1,2,2,6,6-pentamethyl-4-piperidyl sebacate – symbol: ATTENTION SPECIFICATION FUNCTION Facade, prepainted COLOUR TONE Colourless and yellowgreen luminescent DENSITY 1,35 g/l LAYER 100 my dried film CONSUMPTION 4 sqm / liter depending on the application APPLICATION ethanol thinnable SPRAYABLE Versions for brushing and spraying APPLICATION 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 12 hours WATERPROOF 12 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up paint within 6 months - stir up sediment!

Field of application   Luminous dispersion paint ColuxGlow luminous paint white for concrete and wood for interior and exterior use.   Consumption: luminous paint 1 liter is sufficient for 2-3 sqm. WHAT CAN COLUXGLOW PAINT DO? Glow in the dark white emulsion paint for mineral and natural substrates on walls, floors and ceilings for spreading with brush or roller. Weather resistant and suitable for damp areas, facades, stairs and walkways. BRIEF DESCRIPTIONWhite luminous emulsion paint for concrete and wood and other mineral and natural substrates. The paint forms a hydrophobic water-repellent film and is therefore weather-resistant and abrasion-resistant. It is also suitable, for example, for damp rooms, garages and staircases. APPLICATION    ■ The viscosity is set high so that it can be painted on a highly absorbent substrate. ■ Can be diluted with a little water if the substrate is not very absorbent. ■ Becomes sprayable when colourless acrylic dispersion is added. ■ To clean tools, simply use warm water with dishwashing liquid. Can with dried paint residue can be disposed of with residual waste - Remainder emptied containers to plastic recyclable. NOTEProtect from frost! To clean the tools, simply use warm water with washing-up liquid. SPECIFICATION FUNCTION white paint with luminous effect COLOUR TONE White and turquoise luminescent DENSITY 1,6 g/l LAYER 300 my dried film CONSUMPTION 2-3 sqm / liter depending on the application APPLICATION thinnable with acrylate SPRITTABLE Version for brushing - diluted spraying  PROCESSING 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 6 hours WATERPROOF 24 hours PACKAGING 250 ml and 1 litre cans SHELF LIFE Paint shelf life 1 year

Field of application Wood Acrylic Paint blue ColuxGlow glow in the dark paint without black light for painting on aqueous basis Glow in the dark paint without black light  WHAT CAN COLUXGLOW PAINT DO? ColuxGlow wood acrylic paint is a paint for surfaces made of wood and pre-painted surfaces. BRIEF DESCRIPTIONColuxGlow glow-in-the-dark paint without black light is a water-based acrylic paint with a high percentage of afterglow pigments that store and release light energy over time. A white undercoat is recommended to achieve a good glow effect. APPLICATION    ■ The substrate must be clean and dry - a white primer significantly increases the luminous effect, because the luminescent paint is translucent. ■ Depending on the application technique, especially for the spraying process, it can be thinned with up to 10 % quantity of demineralised water. In this case, also stir during painting in order to avoid settling of the pigments. ■ Before the coating dries, remove any masking tape that may have been used so that no film edge is formed during curing. ■ TIP: Do not use an absorbent brush or paint roller for painting! NOTEPaint contains an anti-rot biocide - symbol: CAUTION SPECIFICATION FUNCTION Decorative paint for interior and exterior use COLOUR TONE Colourless and blue luminescent DENSITY 1,35 g/l LAYER 100 my dried film CONSUMPTION 2-3 sqm / liter depending on the application APPLICATION water thinnable 10 SPRAYABLE Versions for brushing and spraying APPLICATION 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 12 hours WATERPROOF 48 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up paint within 6 months - stir up sediment!

Application Buy Wood Acrylic Paint yellow green ColuxGlow Waterborne Brush Paint glow in the dark Buy glow in the dark acrylic paint WHAT CAN COLUXGLOW PAINT DO? ColuxGlow Wood Acrylic Paint is a paint for surfaces made of wood and pre-painted surfaces. BRIEF DESCRIPTIONBuy ColuxGlow Glow in the Dark Acrylic Paint is a water-based acrylic paint with a high percentage of afterglow pigments that store and release light energy over time. A white undercoat is recommended to achieve a good glow-in-the-dark effect. APPLICATION    ■ The substrate must be clean and dry - a white primer significantly increases the luminous effect, because the luminescent paint is translucent. ■ Depending on the application technique, especially for the spraying process, it can be thinned with up to 10 % quantity of demineralised water. In this case, also stir during painting in order to avoid settling of the pigments. ■ Before the coating dries, remove any masking tape that may have been used so that no film edge is formed during curing. ■ TIP: Do not use an absorbent brush or paint roller for painting! NOTEPaint contains an anti-rot biocide - symbol: CAUTION SPECIFICATION FUNCTION Decorative paint for interior and exterior use COLOUR TONE Colourless and yellow-green luminescent DENSITY 1,35 g/l LAYER 100 my dried film CONSUMPTION 2-3 sqm / liter depending on the application APPLICATION water thinnable 10 SPRAYABLE Versions for brushing and spraying APPLICATION 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 12 hours WATERPROOF 48 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up paint within 6 months - stir up sediment!