Application area Neon sign graffiti with luminescent paint for LED short time noctilucent paint. The ColuxGlow illuminated graffiti paint for LED flashlight is an alternative to the other photoluminescent paints. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow glow-in-the-dark paint is a paint for surfaces made of wood and pre-painted surfaces, e.g. wall surfaces. BRIEF DESCRIPTIONColuxGlow Fluorescent Paint is a water-based photoluminescent acrylic paint with a special combination of photoluminescent pigments that store light energy for a few minutes and release it intensively. A white undercoat is recommended to achieve a good luminescent effect. APPLICATION    ■ The substrate must be clean and dry - a white primer significantly increases the luminous effect, because the luminescent paint is translucent. ■ Depending on the application technique, especially for the spraying process, it can be thinned with up to 10 % quantity of demineralised water. In this case, also stir during painting in order to avoid settling of the pigments. ■ Before the coating dries, remove any masking tape that may have been used so that no film edge is formed during curing. ■ TIP: Do not use an absorbent brush or paint roller for painting! NOTEPaint contains an anti-rot biocide - symbol: CAUTION SPECIFICATION FUNCTION Decorative paint for indoor and outdoor use COLOUR TONE intense yellow-green photoluminescent DENSITY 1,35 g/l LAYER 100 my dried film CONSUMPTION 2-3 sqm / liter depending on the application APPLICATION water thinnable 10 SPRAYABLE Versions for brushing and spraying APPLICATION 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 12 hours WATERPROOF 48 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up paint within 6 months - stir up sediment!

Application area ColuxGlow stripping paint blue (does not glow) WHAT CAN COLUXGLOW PAINT DO? Removable coating of ceramic or pre-painted floors as well as natural floors e.g. stone floors, concrete floors, tiles. BRIEF DESCRIPTIONColuxGlow stripping paint blue is a water based natural rubber. This paint does not glow! APPLICATION     ■ No special substrate pretreatment required - applicable to all resilient floor surfaces. May be corrosive to metals! ■ After drying, remove the masking tape used to achieve a clean tear-off edge. ■ Apply in one coat. ■ Application with paint brush or silicone squeegee■ Stir paint before use. Can be thinned with water. ■ TIP: Do not use an absorbent brush or paint roller! ■Tools and brushes can be cleaned with a classic household soda cleaner while the paint is liquid. After the paint has cured, the rubber can be mechanically removed from the surface. NOTEPaint can with liquid paint must not be disposed of with household waste. Do not allow paint to enter drains. SPECIFICATION FUNCTION non-slip marking for indoor and outdoor use COLOUR TONE Blue DENSITY 1,2 g/l LAYER 250-500 my dried film CONSUMPTION 1-2 sqm / liter depending on application APPLICATION water thinnable 10 SPRITTABLE Version for painting  PROCESSING 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 1 hour WATERPROOF 8 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up paint within 6 months - stir up sediment!

Application area ColuxGlow peel-off paint green (does not glow) WHAT CAN COLUXGLOW PAINT DO? Removable coating of ceramic or pre-painted floors as well as natural floors e.g. stone floors, concrete floors, tiles. BRIEF DESCRIPTIONColuxGlow stripping paint green is a water-based natural rubber. This paint does not glow! APPLICATION     ■ No special substrate pretreatment required - applicable to all resilient floor surfaces. May be corrosive to metals! ■ After drying, remove the masking tape used to achieve a clean tear-off edge. ■ Apply in one coat. ■ Application with paint brush or silicone squeegee■ Stir paint before use. Can be thinned with water. ■ TIP: Do not use an absorbent brush or paint roller! ■Tools and brushes can be cleaned with a classic household soda cleaner while the paint is liquid. After the paint has cured, the rubber can be mechanically removed from the surface. NOTEPaint can with liquid paint must not be disposed of with household waste. Do not allow paint to enter drains. SPECIFICATION FUNCTION non-slip marking for indoor and outdoor use COLOUR TONE Green DENSITY 1,2 g/l LAYER 250-500 my dried film CONSUMPTION 1-2 sqm / liter depending on application APPLICATION water thinnable 10 SPRITTABLE Version for painting  PROCESSING 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 1 hour WATERPROOF 8 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up the paint within 6 months - stir up the sediment!

Application area ColuxGlow peel-off paint grass green (does not glow) WHAT CAN COLUXGLOW PAINT DO? Removable coating of ceramic or pre-painted floors as well as natural floors e.g. stone floors, concrete floors, tiles. BRIEF DESCRIPTIONColuxGlow stripping paint blue is a water based natural rubber. This paint does not glow! APPLICATION     ■ No special substrate pretreatment required - applicable to all resilient floor surfaces. May be corrosive to metals! ■ After drying, remove the masking tape used to achieve a clean tear-off edge. ■ Apply in one coat. ■ Application with paint brush or silicone squeegee■ Stir paint before use. Can be thinned with water. ■ TIP: Do not use an absorbent brush or paint roller! ■Tools and brushes can be cleaned with a classic household soda cleaner while the paint is liquid. After the paint has cured, the rubber can be mechanically removed from the surface. NOTEPaint can with liquid paint must not be disposed of with household waste. Do not allow paint to enter drains. SPECIFICATION FUNCTION non-slip marking for indoor and outdoor use COLOUR TONE Grass green DENSITY 1,2 g/l LAYER 250-500 my dried film CONSUMPTION 1-2 sqm / liter depending on application APPLICATION water thinnable 10 SPRITTABLE Version for painting  PROCESSING 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 1 hour WATERPROOF 8 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up the paint within 6 months - stir up the sediment!

Field of application Peelable latex paint ColuxGlow self-luminous peel-off paint escape route marking latex paint on aqueous basis. Example: Suitable for removable markings at events and for cutting symbols. ColuxGlow self-luminous peel-off latex paint for escape route marking is removable. WHAT CAN COLUXGLOW PAINT DO? For removable, self-luminous peel-off paint for escape route marking on smooth floors, e.g. at events, and suitable for cutting symbols. Or for permanent marking of carpeted floors. BRIEF DESCRIPTIONColuxGlow self-luminous peel-off paint for escape route marking is a water-based natural rubber with a high proportion of afterglow pigments that store light energy and release it over time. A white background is advantageous. A white, red and yellow latex paint is included in the range. APPLICATION    ■ No special substrate pre-treatment required - can be used on all mineral and pre-painted surfaces. May have a corrosive effect on metals! ■ Only remove the masking tape used after drying to achieve a clean tear-off edge. ■ Apply with a bristle brush or squeegee technique, e.g. with a silicone squeegee■ Stir paint before use. Can be diluted with water. ■ TIP: Do not use an absorbent brush or paint roller! ■Tools and brushes can be cleaned with a classic household soda cleaner while the paint is liquid. After the paint has cured, the rubber can be mechanically removed from the surface. NOTEPaint can with liquid paint must not be disposed of with household waste. Do not allow paint to enter drains. SPECIFICATION FUNCTION removable on smooth floors and durable on carpeted floors COLOUR TONE yellow-green photoluminescent DENSITY 1,2 g/l LAYER 100 my dried film CONSUMPTION 4 sqm / liter depending on the application APPLICATION water thinnable 10 SPRITTABLE Version for painting  PROCESSING 10-35 degrees C DRY TIME DUST DRY 3 hours PAINTABLE 3 hours WATERPROOF 8 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up the paint within 6 months - stir up the sediment!

Application area ColuxGlow peel-off paint lemon yellow (does not glow) WHAT CAN COLUXGLOW PAINT DO? Removable coating of ceramic or pre-painted floors as well as natural floors e.g. stone floors, concrete floors, tiles. BRIEF DESCRIPTIONColuxGlow stripping paint blue is a water based natural rubber. This paint does not glow! APPLICATION     ■ No special substrate pretreatment required - applicable to all resilient floor surfaces. May be corrosive to metals! ■ After drying, remove the masking tape used to achieve a clean tear-off edge. ■ Apply in one coat. ■ Application with paint brush or silicone squeegee■ Stir paint before use. Can be thinned with water. ■ TIP: Do not use an absorbent brush or paint roller! ■Tools and brushes can be cleaned with a classic household soda cleaner while the paint is liquid. After the paint has cured, the rubber can be mechanically removed from the surface. NOTEPaint can with liquid paint must not be disposed of with household waste. Do not allow paint to enter drains. SPECIFICATION FUNCTION non-slip marking for indoor and outdoor use COLOUR TONE Lemon yellow DENSITY 1,2 g/l LAYER 250-500 my dried film CONSUMPTION 1-2 sqm / liter depending on application APPLICATION water thinnable 10 SPRITTABLE Version for painting  PROCESSING 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 1 hour WATERPROOF 8 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up the paint within 6 months - stir up the sediment!

Application area ColuxGlow stripping paint red RAL 3000 (does not glow) WHAT CAN COLUXGLOW PAINT DO? Removable coating of ceramic or pre-painted floors as well as natural floors e.g. stone floors, concrete floors, tiles. BRIEF DESCRIPTIONColuxGlow Stripping Paint Red is a water-based natural rubber. This paint does not glow! APPLICATION     ■ No special substrate pretreatment required - can be used on all resilient floor surfaces. May be corrosive to metals! ■ After drying, remove the masking tape used to achieve a clean tear-off edge. ■ Apply in one coat. ■ Application with paint brush or silicone squeegee■ Stir paint before use. Can be thinned with water. ■ TIP: Do not use an absorbent brush or paint roller! ■Tools and brushes can be cleaned with a classic household soda cleaner while the paint is liquid. After the paint has cured, the rubber can be mechanically removed from the surface. NOTEPaint can with liquid paint must not be disposed of with household waste. Do not allow paint to enter drains. SPECIFICATION FUNCTION non-slip marking for indoor and outdoor use COLOUR TONE Red RAL 3000 DENSITY 1,2 g/l LAYER 250-500 my dried film CONSUMPTION 1-2 sqm / liter depending on application APPLICATION water thinnable 10 SPRITTABLE Version for painting  PROCESSING 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 1 hour WATERPROOF 8 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up the paint within 6 months - stir up the sediment!

Application area ColuxGlow stripping paint yellow RAL 1023 (does not glow) WHAT CAN COLUXGLOW PAINT DO? Removable coating of ceramic or pre-painted floors as well as natural floors e.g. stone floors, concrete floors, tiles. BRIEF DESCRIPTIONColuxGlow Stripping Paint Yellow is a water-based natural rubber. This paint does not glow! APPLICATION     ■ No special substrate pretreatment required - applicable to all resilient floor surfaces. May be corrosive to metals! ■ After drying, remove the masking tape used to achieve a clean tear-off edge. ■ Apply in one coat. ■ Application with paint brush or silicone squeegee■ Stir paint before use. Can be thinned with water. ■ TIP: Do not use an absorbent brush or paint roller! ■Tools and brushes can be cleaned with a classic household soda cleaner while the paint is liquid. After the paint has cured, the rubber can be mechanically removed from the surface. NOTEPaint can with liquid paint must not be disposed of with household waste. Do not allow paint to enter drains. SPECIFICATION FUNCTION non-slip marking for indoor and outdoor use COLOUR TONE Yellow RAL 1023 DENSITY 1,2 g/l LAYER 250-500 my dried film CONSUMPTION 1-2 sqm / liter depending on application APPLICATION water thinnable 10 SPRITTABLE Version for painting  PROCESSING 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 1 hour WATERPROOF 8 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up the paint within 6 months - stir up the sediment!

Application Stripping paint Primer WhiteColuxGlow primer NR rubber water-based. (Yellow and red on request) WHAT CAN COLUXGLOW PAINT DO? Removable coating of ceramic or pre-painted floors as well as natural floors e.g. stone floors, concrete floors, tiles. BRIEF DESCRIPTIONColuxGlow Stripping Paint Primer White is a water based natural rubber. The mandatory white primer enhances the luminous effect. APPLICATION     ■ No special substrate pretreatment required - applicable to all resilient floor surfaces. May have a corrosive effect on metals! ■ After drying, remove the masking tape used to achieve a clean tear-off edge. ■ Apply in two coats: 1. white 2. afterglow paint■ Apply with paint brush or silicone squeegee■ Stir paint before use. Can be thinned with water. ■ TIP: Do not use an absorbent brush or paint roller! ■Tools and brushes can be cleaned with a classic household soda cleaner while the paint is liquid. After the paint has cured, the rubber can be mechanically removed from the surface. NOTEPaint can with liquid paint must not be disposed of with household waste. Do not allow paint to enter drains. SPECIFICATION FUNCTION non-slip marking for indoor and outdoor use COLOUR TONE White DENSITY 1,2 g/l LAYER 250-500 my dried film CONSUMPTION 1-2 sqm / liter depending on application APPLICATION water thinnable 10 SPRITTABLE Version for painting  PROCESSING 10-35 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 1 hour WATERPROOF 8 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up paint within 6 months - stir up sediment!