Application RUBBER PAINT FLOOR COATINGColuxGlow self-luminous NR rubber on an aqueous basis. WHAT CAN COLUXGLOW PAINT DO? For the coating of elastic flooring and sports flooring made of rubber-like coverings e.g. EPDM, SBR, as well as natural flooring e.g. parquet, cork and textile carpet coverings. Use together with Primer White! BRIEF DESCRIPTIONColuxGlow Gimmi Paint is a water-based natural rubber with a high content of afterglow pigments that store light energy and release it over time. The obligatory white primer acts as a bonding agent and enhances the glow effect. APPLICATION     ■ No special pre-treatment of the substrate - applicable on all elastic floor surfaces. May have a corrosive effect on metals! ■ After drying, remove the masking tape used to achieve a clean tear-off edge. ■ Apply in two coats: 1. white 2. afterglow paint■ Apply with paint brush or silicone squeegee■ Stir paint before use. Can be thinned with water. ■ TIP: Do not use an absorbent brush or paint roller! ■Tools and brushes can be cleaned with a classic household soda cleaner while the paint is liquid. After the paint has cured, the rubber can be mechanically removed from the surface. NOTEPaint can with liquid paint must not be disposed of with household waste. Do not allow paint to enter drains. SPECIFICATION FUNCTION non-slip luminous marking for elastic floors COLOUR TONE yellow-green luminescent as well as white primer DENSITY 1,2 g/l LAYER 250-500 my dried film CONSUMPTION 1-2 sqm / liter depending on application APPLICATION water thinnable 10 SPRITTABLE Version for painting  PROCESSING 10-35 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 1 hour WATERPROOF 8 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up the paint within 6 months - stir up the sediment!

Application RUBBER PAINT UNDERPLAY WHITEColuxGlow primer NR rubber on aqueous basis. (Yellow and red on request) WHAT CAN COLUXGLOW PAINT DO? For the coating of elastic flooring and sports flooring made of rubber-like coverings e.g. EPDM, SBR, as well as natural flooring e.g. parquet, cork and textile carpet coverings BRIEF DESCRIPTIONColuxGlow gimmi paint is a water-based natural rubber. The obligatory white primer serves as a bonding agent and enhances the luminous effect. APPLICATION     ■ No special substrate pretreatment required - applicable to all resilient floor surfaces. May have a corrosive effect on metals! ■ After drying, remove the masking tape used to achieve a clean tear-off edge. ■ Apply in two coats: 1. white 2. afterglow paint■ Apply with paint brush or silicone squeegee■ Stir paint before use. Can be thinned with water. ■ TIP: Do not use an absorbent brush or paint roller! ■Tools and brushes can be cleaned with a classic household soda cleaner while the paint is liquid. After the paint has cured, the rubber can be mechanically removed from the surface. NOTEPaint can with liquid paint must not be disposed of with household waste. Do not allow paint to enter drains. SPECIFICATION FUNCTION non-slip luminous marking for elastic floors COLOUR TONE yellow-green luminescent as well as white primer DENSITY 1,2 g/l LAYER 250-500 my dried film CONSUMPTION 1-2 sqm / liter depending on application APPLICATION water thinnable 10 SPRITTABLE Version for painting  PROCESSING 10-35 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 1 hour WATERPROOF 8 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up paint within 6 months - stir up sediment!