Field of application Test certificate based on the DIN 67510 standard for photoluminescent markings Test certificate of the luminance measurement from the product standard for photoluminescent markings Creation of a test certificate from a laboratory order in accordance with DIN 67510-4 with the values of the luminance measurement and luminous duration determination for photoluminescent markings. The photoluminescent products tested in this way show the results  in relation to the specifications of ASR A3.4/7 and DIN 67510-4 Class B or C and can be assigned accordingly. ASR A3.4/7 : Workplace safety Class B: For better orientation on escape and rescue routes in the dark Class C: If no sufficient safety lighting is available as well as for the installation of photoluminescent markings for optical safety guidance systems. Type and scope of service Scope of services: Testing of the reset pattern from the standard or from the special design. Additional service: Testing of one of the customer's objects that you make available to us for measurement.

Application area EP Floor Paint Interior Version 3 - blue photoluminescent ColuxGlow blue luminescent floor paint made of epoxy resin floor paint 2K indoor (solvent f r e i ) WHAT CAN COLUXGLOW PAINT DO? ColuxGlow blue photoluminescent floor paint for interior use is solvent-free and suitable for applications in enclosed spaces with pedestrian traffic, e.g. airport buildings. SHORT DESCRIPTIONColuxGlow blue photoluminescent floor paint for interior use for all types of floors on mineral surfaces such as glass, concrete, stone, screed, pavement in dry, grease-, oil- and silicone-free condition. Also suitable for hard foam boards such as polystyrene. Approved for indoor use, e.g. hygiene rooms, canteens. APPLICATION     ■ Mixing ratio (complete 0.8 kg): Already weighed out portions-    Parts by weight component  A -    Parts by weight component  B     A+B 1 part-    Parts by weight component  C      0.85 part■ Stir with forced mixer hoist and cordless drill first at low and then at medium speed in two working steps. ■ Pour component A and B  (liquid) together in the plastic container and mix homogeneously for approx. 2  minutes at low rotational speed. Add component C (powder) in portions and continue to stir for a further 2  minutes until a homogeneous viscous mass is obtained. ■ Relative humidity maximum 80 % and protect from water for at least 48 hours, otherwise white veils will form! TIP: For a perfect photoluminescent marking paint, mask the floor with tape and remove shortly after painting to prevent edges from forming and the film from tearing. NOTE CAUTION. Hardener Corrosive: Skin contact with epoxy resins may cause allergies: Work latex or nitrile gloves. Harmful by inhalation, ingestion and in contact with skin. Causes burns. May cause sensitization by skin contact. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. SPECIFICATION FUNCTION photoluminescent escape route marking COLOUR yellow-green photoluminescent DENSITY 0,8 kg protioined in A+B+C LAYER 300 my dried film CONSUMPTION 0,5 sqm content APPLICATION Pin roller against bubble formation, brush, squeegee, smoothing trowel DRYING TIME 60 minutes at  10° C,  45 minutes below 20° C (Max  30°C), substrate at least + 3° C PROCESSING 10-25 degrees C DRYING TIME DRYING TIME 45 minutes STORABLE 12 hours LOADABLE 3 days PACKAGING Three cans/components TOOLS For cleaning tools use universal thinner with xylene content

Application area EP floor paint interior version 3 - luminescent marking paints ColuxGlow photoluminescent marking paints made of epoxy resin floor paint 2K indoor (solvent f r e i ) WHAT CAN COLUXGLOW PAINT DO? ColuxGlow Floor Paint Interior is solvent free and suitable for applications in enclosed areas with pedestrian traffic e.g. airport buildings. SHORT DESCRIPTIONColuxGlow photoluminescent marking paint Floor paint Interior for all types of floors on mineral composition such as glass, concrete, stone, screed, pavement in dry, grease and oil and silicone free condition. Also suitable for hard foam boards such as polystyrene. Approved for indoor use, e.g. hygiene rooms, canteens. APPLICATION     ■ Mixing ratio (complete 0.8 kg): Already weighed out portions-    Parts by weight component  A -    Parts by weight component  B     A+B 1 part-    Parts by weight component  C      0.85 part■ Stir with forced mixer hoist and cordless drill first at low and then at medium speed in two working steps. ■ Pour component A and B  (liquid) together in the plastic container and mix homogeneously for approx. 2  minutes at low rotation speed. Add component C (powder) in portions and continue to stir for a further 2  minutes until a homogeneous viscous mass is obtained. ■ Relative humidity maximum 80 % and protect from water for at least 48 hours, otherwise white veils will form! TIP: For a perfect photoluminescent marking paint, mask the floor with tape and remove shortly after painting to prevent edges from forming and the film from tearing. NOTE CAUTION. Hardener Corrosive: Skin contact with epoxy resins may cause allergies: Work latex or nitrile gloves. Harmful by inhalation, ingestion and in contact with skin. Causes burns. May cause sensitization by skin contact. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. SPECIFICATION FUNCTION photoluminescent escape route marking COLOUR yellow-green photoluminescent DENSITY 0,8 kg protioined in A+B+C LAYER 300 my dried film CONSUMPTION 0,5 sqm content APPLICATION Pin roller against bubble formation, brush, squeegee, smoothing trowel DRYING TIME 60 minutes at  10° C,  45 minutes below 20° C (Max  30°C), substrate at least + 3° C PROCESSING 10-25 degrees C DRYING TIME DRYING TIME 45 minutes STORABLE 12 hours LOADABLE 3 days PACKAGING Three cans/components TOOLS For cleaning tools use universal thinner with xylene content