Scattering agent - corundum (aluminium oxide) Physical and chemical properties:  Grain size in 300-600 microns in white,  Bulk density 2000 (g/L) Application Coluxglow Floor Paint Exterior PUR 1K ColuxGlow PUR is also used as a binder for decorative mortar coverings in outdoor areas. On weathered outdoor surfaces, anti-skid coatings with sprinkling agent are generally recommended. The material is suitable for priming, levelling and finishing layers. The coverings are elastic and crack-bridging and are therefore particularly suitable for substrates that are subject to greater deformation due to temperature, such as concrete surfaces in outdoor areas. For balconies and terraces, some details such as connections, water drainage, slopes and others have to be taken into account. The colourless sealing of tiles is not recommended. Legal requirements for slip-resistant properties Floors - ASR A1.5/1.2 specifies the requirements of the Ordinance on Workplaces within the scope of application. If the technical rules are complied with, the employer can assume that the corresponding requirements of the ordinance are met. If the employer chooses a different solution, he must achieve at least the same level of safety and health protection for the employees. Floors in rooms must not have any unevenness, depressions, trip hazards or dangerous slopes. They must be secured against slipping or tipping (e.g. in the case of covers) and be load-bearing, slip-resistant and non-slip.

Field of application Test certificate based on the DIN 67510 standard for photoluminescent markings Test certificate of the luminance measurement from the product standard for photoluminescent markings Creation of a test certificate from a laboratory order in accordance with DIN 67510-4 with the values of the luminance measurement and luminous duration determination for photoluminescent markings. The photoluminescent products tested in this way show the results  in relation to the specifications of ASR A3.4/7 and DIN 67510-4 Class B or C and can be assigned accordingly. ASR A3.4/7 : Workplace safety Class B: For better orientation on escape and rescue routes in the dark Class C: If no sufficient safety lighting is available as well as for the installation of photoluminescent markings for optical safety guidance systems. Type and scope of service Scope of services: Testing of the reset pattern from the standard or from the special design. Additional service: Testing of one of the customer's objects that you make available to us for measurement.

Application area EP Floor Paint Interior Version 3 - blue photoluminescent ColuxGlow blue luminescent floor paint made of epoxy resin floor paint 2K indoor (solvent f r e i ) WHAT CAN COLUXGLOW PAINT DO? ColuxGlow blue photoluminescent floor paint for interior use is solvent-free and suitable for applications in enclosed spaces with pedestrian traffic, e.g. airport buildings. SHORT DESCRIPTIONColuxGlow blue photoluminescent floor paint for interior use for all types of floors on mineral surfaces such as glass, concrete, stone, screed, pavement in dry, grease-, oil- and silicone-free condition. Also suitable for hard foam boards such as polystyrene. Approved for indoor use, e.g. hygiene rooms, canteens. APPLICATION     ■ Mixing ratio (complete 0.8 kg): Already weighed out portions-    Parts by weight component  A -    Parts by weight component  B     A+B 1 part-    Parts by weight component  C      0.85 part■ Stir with forced mixer hoist and cordless drill first at low and then at medium speed in two working steps. ■ Pour component A and B  (liquid) together in the plastic container and mix homogeneously for approx. 2  minutes at low rotational speed. Add component C (powder) in portions and continue to stir for a further 2  minutes until a homogeneous viscous mass is obtained. ■ Relative humidity maximum 80 % and protect from water for at least 48 hours, otherwise white veils will form! TIP: For a perfect photoluminescent marking paint, mask the floor with tape and remove shortly after painting to prevent edges from forming and the film from tearing. NOTE CAUTION. Hardener Corrosive: Skin contact with epoxy resins may cause allergies: Work latex or nitrile gloves. Harmful by inhalation, ingestion and in contact with skin. Causes burns. May cause sensitization by skin contact. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. SPECIFICATION FUNCTION photoluminescent escape route marking COLOUR yellow-green photoluminescent DENSITY 0,8 kg protioined in A+B+C LAYER 300 my dried film CONSUMPTION 0,5 sqm content APPLICATION Pin roller against bubble formation, brush, squeegee, smoothing trowel DRYING TIME 60 minutes at  10° C,  45 minutes below 20° C (Max  30°C), substrate at least + 3° C PROCESSING 10-25 degrees C DRYING TIME DRYING TIME 45 minutes STORABLE 12 hours LOADABLE 3 days PACKAGING Three cans/components TOOLS For cleaning tools use universal thinner with xylene content

Application area EP floor paint interior version 3 - luminescent marking paints ColuxGlow photoluminescent marking paints made of epoxy resin floor paint 2K indoor (solvent f r e i ) WHAT CAN COLUXGLOW PAINT DO? ColuxGlow Floor Paint Interior is solvent free and suitable for applications in enclosed areas with pedestrian traffic e.g. airport buildings. SHORT DESCRIPTIONColuxGlow photoluminescent marking paint Floor paint Interior for all types of floors on mineral composition such as glass, concrete, stone, screed, pavement in dry, grease and oil and silicone free condition. Also suitable for hard foam boards such as polystyrene. Approved for indoor use, e.g. hygiene rooms, canteens. APPLICATION     ■ Mixing ratio (complete 0.8 kg): Already weighed out portions-    Parts by weight component  A -    Parts by weight component  B     A+B 1 part-    Parts by weight component  C      0.85 part■ Stir with forced mixer hoist and cordless drill first at low and then at medium speed in two working steps. ■ Pour component A and B  (liquid) together in the plastic container and mix homogeneously for approx. 2  minutes at low rotation speed. Add component C (powder) in portions and continue to stir for a further 2  minutes until a homogeneous viscous mass is obtained. ■ Relative humidity maximum 80 % and protect from water for at least 48 hours, otherwise white veils will form! TIP: For a perfect photoluminescent marking paint, mask the floor with tape and remove shortly after painting to prevent edges from forming and the film from tearing. NOTE CAUTION. Hardener Corrosive: Skin contact with epoxy resins may cause allergies: Work latex or nitrile gloves. Harmful by inhalation, ingestion and in contact with skin. Causes burns. May cause sensitization by skin contact. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. SPECIFICATION FUNCTION photoluminescent escape route marking COLOUR yellow-green photoluminescent DENSITY 0,8 kg protioined in A+B+C LAYER 300 my dried film CONSUMPTION 0,5 sqm content APPLICATION Pin roller against bubble formation, brush, squeegee, smoothing trowel DRYING TIME 60 minutes at  10° C,  45 minutes below 20° C (Max  30°C), substrate at least + 3° C PROCESSING 10-25 degrees C DRYING TIME DRYING TIME 45 minutes STORABLE 12 hours LOADABLE 3 days PACKAGING Three cans/components TOOLS For cleaning tools use universal thinner with xylene content

Field of application Primer PUR Colours White ColuxGlow solvent-based   WHAT CAN COLUXGLOW PAINT DO? ColuxGlow PUR Primer White on solvent basis (1-K-polyurethane coating) - Suitable as primer for a luminous paint on mineral or pre-painted floors e.g. garage car park, workshop... BRIEF DESCRIPTIONColuxGlow High-solid solvent-based primer White, light- and weather-resistant paint for application with brush or for coating mineral substrates, concrete, wood, metal and GRP. APPLICATION    ■ The substrate must be dry and free from loose particles. Remove grease, oil and paint residues from the substrate. Do not apply to damp concrete. Moisture from the substrate may cause blistering. ■ A white primer enhances the luminous effect. A white undercoat paint is included in the range. Pigments to be avoided. ■ Apply with a paint brush (plastic bristles) or by pouring. The film dries without bubbles. No dripping time. ■ Important: This PUR is a reactive resin and hardens due to moisture in the air. Do not dry with heat under any circumstances! ■ TIP: Mask with tape and remove shortly after painting to prevent edges from forming and film from tearing. NOTEContains :aliphatic polyisocyanate, IPDI,1,6-hexanediyl-bis(2-(2-(1-ethylpentyl)-3-oxazolidinyl)ethyl)carbamate,    See MSDS for hazard statements!- Symbol: CAUTION + FlameFlammable liquid and vapor. May cause allergic skin reactions. Harmful to aquatic life with long lasting effects. Keep away from heat/sparks/open flames/hot surfaces. Do not smoke. Do not breathe dust/fume/gas/mist/vapour/aerosol. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. Additional information: Contains isocyanates. May cause allergic reactions. SPECIFICATION FUNCTION Safety marking White COLOR TONE White DENSITY 1,35 g/l LAYER 400 my dried film CONSUMPTION 1 sqm / 375 ml APPLICATION Thinnable with universal thinner with xylene content SPRITTABLE Brushing and squeegeeing PROCESSING Fresh air supply - not in frosty conditions DRY TIME DUST DRY 4 hours PAINTABLE 1 hour WATCHABLE 24 hours PACKAGING 375 ml and 750 ml cans SHELF LIFE Tightly close the quantity in the tin container - but then only storable for a short time.  - Stir up the sediment!    

Field of application Primer PUR Colours White ColuxGlow solvent-based   WHAT CAN COLUXGLOW PAINT DO? ColuxGlow PUR Primer Yellow on solvent basis (1-K-polyurethane coating) - Suitable as primer for a luminous paint on mineral or pre-painted floors e.g. garage car park, workshop... BRIEF DESCRIPTIONColuxGlow High-solid solvent-based primer Yellow, light- and weather-resistant paint for application with brush or for coating mineral substrates, concrete, wood, metal and GRP. APPLICATION    ■ The substrate must be dry and free from loose particles. Remove grease, oil and paint residues from the substrate. Do not apply to damp concrete. Moisture from the substrate may cause blistering. ■ A yellow primer enhances the luminous effect. A white undercoat paint is included in the range. Pigments to be avoided. ■ Apply with a paint brush (plastic bristles) or by pouring. The film dries without bubbles. No dripping time. ■ Important: This PUR is a reactive resin and hardens due to moisture in the air. Do not dry with heat under any circumstances! ■ TIP: Mask with tape and remove shortly after painting to prevent edges from forming and film from tearing. NOTEContains :aliphatic polyisocyanate, IPDI,1,6-hexanediyl-bis(2-(2-(1-ethylpentyl)-3-oxazolidinyl)ethyl)carbamate,    See MSDS for hazard statements!- Symbol: CAUTION + FlameFlammable liquid and vapor. May cause allergic skin reactions. Harmful to aquatic life with long lasting effects. Keep away from heat/sparks/open flames/hot surfaces. Do not smoke. Do not breathe dust/fume/gas/mist/vapour/aerosol. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. Additional information: Contains isocyanates. May cause allergic reactions. SPECIFICATION FUNCTION Safety marking White COLOR TONE Yellow DENSITY 1,35 g/l LAYER 400 my dried film CONSUMPTION 1 sqm / 375 ml APPLICATION Thinnable with universal thinner with xylene content SPRITTABLE Brushing and squeegeeing PROCESSING Fresh air supply - not in frosty conditions DRY TIME DUST DRY 4 hours PAINTABLE 1 hour WATCHABLE 24 hours PACKAGING 375 ml and 750 ml cans SHELF LIFE Tightly close the quantity in the tin container - but then only storable for a short time.  - Stir up the sediment!    

Application area PUR floor marking paint blue glow-in-the-dark paint   ColuxGlow glow-in-the-dark paint PUR on solvent basis for outdoor use   PUR floor marking paint glow-in-the-dark paint (1-component polyurethane coating) - in white with blue luminescent paint or mint green with yellow-green luminescent paint that glows in the dark. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow PUR floor marking paint glow-in-the-dark colour (1-component polyurethane coating) - in mint green with yellow-green luminescent paint or colourless in blue luminescent paint that glows in the dark and  a white primer to match. BRIEF DESCRIPTIONColuxGlow High-solid solvent-based floor marking paint glow in the dark color, light and weather resistant paint for application with brush or for coating mineral substrates, concrete, wood, metal and GRP. APPLICATION    ■ The substrate must be dry and free from loose particles. Remove grease, oil and paint residues from the substrate. Do not apply to damp concrete. Moisture from the substrate may cause blistering. ■ A white primer enhances the luminous effect. A white undercoat paint is included in the range. Pigments to be avoided. ■ Apply with a paint brush (plastic bristles) or by pouring. The film dries without bubbles. No dripping time. ■ Important: This PUR is a reactive resin and hardens due to moisture in the air. Do not dry with heat under any circumstances! ■ TIP: Mask with tape and remove shortly after painting to prevent edges from forming and film from tearing. NOTEContains :aliphatic polyisocyanate, IPDI,1,6-hexanediyl-bis(2-(2-(1-ethylpentyl)-3-oxazolidinyl)ethyl)carbamate,    See MSDS for hazard statements!- Symbol: CAUTION + FlameFlammable liquid and vapor. May cause allergic skin reactions. Harmful to aquatic life with long lasting effects. Keep away from heat/sparks/open flames/hot surfaces. Do not smoke. Do not breathe dust/fume/gas/mist/vapour/aerosol. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. Additional information: Contains isocyanates. May cause allergic reactions. SPECIFICATION FUNCTION Safety marking COLOUR TONE yellow-green or blue photoluminescent DENSITY 1,35 g/l LAYER 400 my dried film CONSUMPTION 1 sqm / 750 ml APPLICATION Thinnable with universal thinner with xylene content SPRITTABLE Brushing and squeegeeing PROCESSING Fresh air supply - not in frosty conditions DRY TIME DUST DRY 4 hours PAINTABLE 1 hour WATCHABLE 24 hours PACKAGING 375 ml and 750 ml cans SHELF LIFE Tightly seal opened quantity in tin container - but then only storable for a short time.  - Stir up the sediment!  

Field of application PUR Floor Paint yellow-green ColuxGlow 1K PUR for marking escape routes outdoors   Night glow colours for marking escape routes (1-component polyurethane coating) - in white with blue glow colour or mint green with yellow-green glow colour that glows in the dark. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow PUR floor paint for marking escape routes (1-component polyurethane coating) - in mint green with yellow-green luminescent paint or colourless in blue luminescent paint that glows in the dark and  a matching white primer. BRIEF DESCRIPTIONColuxGlow High-solid solvent-based floor paint for marking escape routes, lightfast and weather-resistant paint for application with a brush or for coating mineral substrates, concrete, wood, metal and GRP. APPLICATION    ■ The surface must be dry and free of loose particles. Remove grease, oil and paint residues from the substrate. Do not apply to damp concrete. Moisture from the substrate may cause blistering. ■ A white primer enhances the luminous effect. A white undercoat paint is included in the range. Pigments to be avoided. ■ Apply with a paint brush (plastic bristles) or by pouring. The film dries without bubbles. No dripping time. ■ Important: This PUR is a reactive resin and hardens due to moisture in the air. Do not dry with heat under any circumstances! ■ TIP: Mask with tape and remove shortly after painting to prevent edges from forming and film from tearing. NOTEContains :aliphatic polyisocyanate, IPDI,1,6-hexanediyl-bis(2-(2-(1-ethylpentyl)-3-oxazolidinyl)ethyl)carbamate,    See MSDS for hazard statements!- Symbol: CAUTION + FlameFlammable liquid and vapor. May cause allergic skin reactions. Harmful to aquatic life with long lasting effects. Keep away from heat/sparks/open flames/hot surfaces. Do not smoke. Do not breathe dust/fume/gas/mist/vapour/aerosol. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water. Additional information: Contains isocyanates. May cause allergic reactions. SPECIFICATION FUNCTION Safety marking COLOUR TONE yellow-green or blue photoluminescent DENSITY 1,35 g/l LAYER 400 my dried film CONSUMPTION 1 sqm / 750 ml APPLICATION Thinnable with universal thinner with xylene content SPRITTABLE Brushing and squeegeeing PROCESSING Fresh air supply - not in frosty conditions DRY TIME DUST DRY 4 hours PAINTABLE 1 hour WATCHABLE 24 hours PACKAGING 375 ml and 750 ml cans SHELF LIFE Tightly close the quantity in the tin container - but then only storable for a short time.  - Stir up the sediment!

Application RUBBER PAINT FLOOR COATINGColuxGlow self-luminous NR rubber on an aqueous basis. WHAT CAN COLUXGLOW PAINT DO? For the coating of elastic flooring and sports flooring made of rubber-like coverings e.g. EPDM, SBR, as well as natural flooring e.g. parquet, cork and textile carpet coverings. Use together with Primer White! BRIEF DESCRIPTIONColuxGlow Gimmi Paint is a water-based natural rubber with a high content of afterglow pigments that store light energy and release it over time. The obligatory white primer acts as a bonding agent and enhances the glow effect. APPLICATION     ■ No special pre-treatment of the substrate - applicable on all elastic floor surfaces. May have a corrosive effect on metals! ■ After drying, remove the masking tape used to achieve a clean tear-off edge. ■ Apply in two coats: 1. white 2. afterglow paint■ Apply with paint brush or silicone squeegee■ Stir paint before use. Can be thinned with water. ■ TIP: Do not use an absorbent brush or paint roller! ■Tools and brushes can be cleaned with a classic household soda cleaner while the paint is liquid. After the paint has cured, the rubber can be mechanically removed from the surface. NOTEPaint can with liquid paint must not be disposed of with household waste. Do not allow paint to enter drains. SPECIFICATION FUNCTION non-slip luminous marking for elastic floors COLOUR TONE yellow-green luminescent as well as white primer DENSITY 1,2 g/l LAYER 250-500 my dried film CONSUMPTION 1-2 sqm / liter depending on application APPLICATION water thinnable 10 SPRITTABLE Version for painting  PROCESSING 10-35 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 1 hour WATERPROOF 8 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up the paint within 6 months - stir up the sediment!

Application RUBBER PAINT UNDERPLAY WHITEColuxGlow primer NR rubber on aqueous basis. (Yellow and red on request) WHAT CAN COLUXGLOW PAINT DO? For the coating of elastic flooring and sports flooring made of rubber-like coverings e.g. EPDM, SBR, as well as natural flooring e.g. parquet, cork and textile carpet coverings BRIEF DESCRIPTIONColuxGlow gimmi paint is a water-based natural rubber. The obligatory white primer serves as a bonding agent and enhances the luminous effect. APPLICATION     ■ No special substrate pretreatment required - applicable to all resilient floor surfaces. May have a corrosive effect on metals! ■ After drying, remove the masking tape used to achieve a clean tear-off edge. ■ Apply in two coats: 1. white 2. afterglow paint■ Apply with paint brush or silicone squeegee■ Stir paint before use. Can be thinned with water. ■ TIP: Do not use an absorbent brush or paint roller! ■Tools and brushes can be cleaned with a classic household soda cleaner while the paint is liquid. After the paint has cured, the rubber can be mechanically removed from the surface. NOTEPaint can with liquid paint must not be disposed of with household waste. Do not allow paint to enter drains. SPECIFICATION FUNCTION non-slip luminous marking for elastic floors COLOUR TONE yellow-green luminescent as well as white primer DENSITY 1,2 g/l LAYER 250-500 my dried film CONSUMPTION 1-2 sqm / liter depending on application APPLICATION water thinnable 10 SPRITTABLE Version for painting  PROCESSING 10-35 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 1 hour WATERPROOF 8 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up paint within 6 months - stir up sediment!