Application area Neon sign graffiti with luminescent paint for LED short time noctilucent paint. The ColuxGlow illuminated graffiti paint for LED flashlight is an alternative to the other photoluminescent paints. WHAT CAN COLUXGLOW PAINT DO? ColuxGlow glow-in-the-dark paint is a paint for surfaces made of wood and pre-painted surfaces, e.g. wall surfaces. BRIEF DESCRIPTIONColuxGlow Fluorescent Paint is a water-based photoluminescent acrylic paint with a special combination of photoluminescent pigments that store light energy for a few minutes and release it intensively. A white undercoat is recommended to achieve a good luminescent effect. APPLICATION    ■ The substrate must be clean and dry - a white primer significantly increases the luminous effect, because the luminescent paint is translucent. ■ Depending on the application technique, especially for the spraying process, it can be thinned with up to 10 % quantity of demineralised water. In this case, also stir during painting in order to avoid settling of the pigments. ■ Before the coating dries, remove any masking tape that may have been used so that no film edge is formed during curing. ■ TIP: Do not use an absorbent brush or paint roller for painting! NOTEPaint contains an anti-rot biocide - symbol: CAUTION SPECIFICATION FUNCTION Decorative paint for indoor and outdoor use COLOUR TONE intense yellow-green photoluminescent DENSITY 1,35 g/l LAYER 100 my dried film CONSUMPTION 2-3 sqm / liter depending on the application APPLICATION water thinnable 10 SPRAYABLE Versions for brushing and spraying APPLICATION 10-25 degrees C DRY TIME DUST DRY 2 hours PAINTABLE 12 hours WATERPROOF 48 hours PACKAGING 375 ml and 1 litre cans SHELF LIFE Use up paint within 6 months - stir up sediment!