EP Floor paint interior - yellow green photoluminescent

Application area

EP floor paint interior version 3 - luminescent marking paints

ColuxGlow photoluminescent marking paints made of epoxy resin floor paint 2K indoor (solvent f r e i )

WHAT CAN COLUXGLOW PAINT DO?
ColuxGlow Floor Paint Interior is solvent free and suitable for applications in enclosed areas with pedestrian traffic e.g. airport buildings.

SHORT DESCRIPTION
ColuxGlow photoluminescent marking paint Floor paint Interior for all types of floors on mineral composition such as glass, concrete, stone, screed, pavement in dry, grease and oil and silicone free condition. Also suitable for hard foam boards such as polystyrene. Approved for indoor use, e.g. hygiene rooms, canteens.

APPLICATION    
■ Mixing ratio (complete 0.8 kg):
Already weighed out portions
-    Parts by weight component  A
-    Parts by weight component  B     A+B 1 part
-    Parts by weight component  C      0.85 part
■ Stir with forced mixer hoist and cordless drill first at low and then at medium speed in two working steps.
■ Pour component A and B  (liquid) together in the plastic container and mix homogeneously for approx. 2  minutes at low rotation speed. Add component C (powder) in portions and continue to stir for a further 2  minutes until a homogeneous viscous mass is obtained.
■ Relative humidity maximum 80 % and protect from water for at least 48 hours, otherwise white veils will form!

TIP: For a perfect photoluminescent marking paint, mask the floor with tape and remove shortly after painting to prevent edges from forming and the film from tearing.

NOTE
CAUTION. Hardener Corrosive: Skin contact with epoxy resins may cause allergies: Work latex or nitrile gloves. Harmful by inhalation, ingestion and in contact with skin. Causes burns. May cause sensitization by skin contact. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

SPECIFICATION