Illuminated lettering colour for illuminated lettering with LED
€36.55*
Available, delivery time: 1-3 days
Kurzbeschreibung: For graffiti illuminated lettering with the LED flashlight (outdoor, indoor)
Application area
Neon sign graffiti with luminescent paint for LED short time noctilucent paint.
The ColuxGlow illuminated graffiti paint for LED flashlight is an alternative to the other photoluminescent paints.
WHAT CAN COLUXGLOW PAINT DO?
ColuxGlow glow-in-the-dark paint is a paint for surfaces made of wood and pre-painted surfaces, e.g. wall surfaces.
BRIEF DESCRIPTION
ColuxGlow Fluorescent Paint is a water-based photoluminescent acrylic paint with a special combination of photoluminescent pigments that store light energy for a few minutes and release it intensively. A white undercoat is recommended to achieve a good luminescent effect.
APPLICATION
■ The substrate must be clean and dry - a white primer significantly increases the luminous effect, because the luminescent paint is translucent.
■ Depending on the application technique, especially for the spraying process, it can be thinned with up to 10 % quantity of demineralised water. In this case, also stir during painting in order to avoid settling of the pigments.
■ Before the coating dries, remove any masking tape that may have been used so that no film edge is formed during curing.
■ TIP: Do not use an absorbent brush or paint roller for painting!
NOTE
Paint contains an anti-rot biocide - symbol: CAUTION
SPECIFICATION
| FUNCTION | Decorative paint for indoor and outdoor use | |
| COLOUR TONE | intense yellow-green photoluminescent | |
| DENSITY | 1,35 g/l | |
| LAYER | 100 my dried film | |
| CONSUMPTION | 2-3 sqm / liter depending on the application | |
| APPLICATION | water thinnable 10 | |
| SPRAYABLE | Versions for brushing and spraying | |
| APPLICATION | 10-25 degrees C | |
| DRY TIME | DUST DRY | 2 hours |
| PAINTABLE | 12 hours | |
| WATERPROOF | 48 hours | |
| PACKAGING | 375 ml and 1 litre cans | |
| SHELF LIFE | Use up paint within 6 months - stir up sediment! | |
SPEZIFIKATION
| FUNKTION | Dekorfarbe für Innen und Aussen | |
| FARBTON | intensiv gelbgrün nachleuchtend | |
| DICHTE | 1,35 g/l | |
| SCHICHT | 100 my getrockneter Film | |
| VERBRAUCH | 2-3 qm / Liter je nach Anwendung | |
| ANWENDUNG | wasserverdünnbar 10 % | |
| SPRITZBAR | Versionen zum Streichen und Sprühen | |
| VERARBEITUNG | 10-25 Grad C | |
| TROCKENZEIT | STAUBTROCKEN | 2 Stunden |
| ÜBERSTREICHBAR | 12 Stunden | |
| WASSERFEST | 48 Stunden | |
| VERPACKUNG | Dosen 375 ml und 1 Liter | |
| LAGERFÄHIGKEIT/HALTBARKEIT | Anstrichfarbe innerhalb von 6 Monaten aufbrauchen - Bodensatz aufrühren! | |
Login