Phone +49 6326 980094
Mo-Fr 9-16
1-3 Days 5,35€ (D)

EP Floor paint interior - blue photoluminescent

€62.80*

Content: 0.8 Kilogramm (€78.50* / 1 Kilogramm)

Available, delivery time: 1-3 days

0,8 kg
Product number: SW10073
EAN: 0675051095215
Hinweis:
Kurzbeschreibung: ColuxGlow epoxy resin floor paint 2K indoor blue photoluminescent (solvent free) for marking on the floor escape route (mark, pour, indoor) version 3 glossy surface.
Product information "EP Floor paint interior - blue photoluminescent"

Application area

pic-able
Photoluminescent
pic mix
DIN67150

EP Floor Paint Interior Version 3 - blue photoluminescent

ColuxGlow blue luminescent floor paint made of epoxy resin floor paint 2K indoor (solvent f r e i )

WHAT CAN COLUXGLOW PAINT DO?
ColuxGlow blue photoluminescent floor paint for interior use is solvent-free and suitable for applications in enclosed spaces with pedestrian traffic, e.g. airport buildings.

SHORT DESCRIPTION
ColuxGlow blue photoluminescent floor paint for interior use for all types of floors on mineral surfaces such as glass, concrete, stone, screed, pavement in dry, grease-, oil- and silicone-free condition. Also suitable for hard foam boards such as polystyrene. Approved for indoor use, e.g. hygiene rooms, canteens.

APPLICATION    
■ Mixing ratio (complete 0.8 kg):
Already weighed out portions
-    Parts by weight component  A
-    Parts by weight component  B     A+B 1 part
-    Parts by weight component  C      0.85 part
■ Stir with forced mixer hoist and cordless drill first at low and then at medium speed in two working steps.
■ Pour component A and B  (liquid) together in the plastic container and mix homogeneously for approx. 2  minutes at low rotational speed. Add component C (powder) in portions and continue to stir for a further 2  minutes until a homogeneous viscous mass is obtained.
■ Relative humidity maximum 80 % and protect from water for at least 48 hours, otherwise white veils will form!

TIP: For a perfect photoluminescent marking paint, mask the floor with tape and remove shortly after painting to prevent edges from forming and the film from tearing.

NOTE
CAUTION. Hardener Corrosive: Skin contact with epoxy resins may cause allergies: Work latex or nitrile gloves. Harmful by inhalation, ingestion and in contact with skin. Causes burns. May cause sensitization by skin contact. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

SPECIFICATION

FUNCTION photoluminescent escape route marking
COLOUR yellow-green photoluminescent
DENSITY 0,8 kg protioined in A+B+C
LAYER 300 my dried film
CONSUMPTION 0,5 sqm content
APPLICATION Pin roller against bubble formation, brush, squeegee, smoothing trowel
DRYING TIME 60 minutes at  10° C,  45 minutes below 20° C (Max  30°C), substrate at least + 3° C
PROCESSING 10-25 degrees C
DRYING TIME DRYING TIME 45 minutes
STORABLE 12 hours
LOADABLE 3 days
PACKAGING Three cans/components
TOOLS For cleaning tools use universal thinner with xylene content

SPEZIFIKATION

FUNKTIONlangnachleuchtende Fluchtwegmarkierung
FARBTONblau nachleuchtend
DICHTE0,8 kg protioiniert in A+B+C
SCHICHT300 my getrockneter Film
VERBRAUCH0,5 qm Inhaltsmenge
ANWENDUNGNadelwalze gegen Blasenbildung, Pinsel, Rakel,Glättkelle
TROPFZEIT60 Minuten bei  10° C,  45 Minuten unter 20° C (Max  30°C), Untergrund mindestens + 3° C
VERARBEITUNG10-25 Grad C
TROCKENZEITTROPFZEIT45 Minuten
BEGEHBAR12 Stunden
BELASTBAR3 Tage
VERPACKUNGDrei Dosen/Komponenten
WERKZEUGEZum Reinigen von Werkzeug Universalverdünner mit Xylol-Anteil verwenden

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


dazu passende Artikel

Paint mixer 60 mm for craftsmen and painters
The paint mixer for craftsmen and painters to buy the 2-K afterglow paint 60 mm is used primarily for mixing two-component paints (2K EP) if you buy, for example, the following afterglow paint: - the floor paint inside (EP2K) - or the (PUR 2K) varnish. All other one-component paints can be stirred with a stirring rod without a paint mix er.

€5.99*