Field of application Textile printing ink red ColuxGlow self-luminous screen printing inks   Water based self-luminous screen printing inks for printing on cotton and synthetic fabrics made of polyester, nylon. WHAT CAN COLUXGLOW INK DO? ColuxGlow self-luminous screen printing inks textile is a water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon. BRIEF DESCRIPTIONColuxGlow water-based ink system self-luminous screen printing inks are free of gasoline, solvents and formaldehyde. Contains no banned substances according to Ökotex Standard and is free from THM Annex 38.APPLICATION    ■ ColuxGlow textile is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at  150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Coloured photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / litre  APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use.

Field of application Afterglow Textile Printing Ink yellow green ColuxGlow Screen Printing Ink Water based afterglow textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon.   The water-based afterglow textile printing ink is free of petrol, solvents and formaldehyde. Contains no banned substances according to Ökotex standard and is free from THM annex 38. WHAT CAN COLUXGLOW INK DO? ColuxGlow afterglow textile printing ink is a water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon.BRIEF DESCRIPTIONColuxGlow water-based ink system afterglow textile printing ink, free of petrol, solvents and formaldehyde. Contains no banned substances according to Ökotex standard and is free from THM Annex 38.APPLICATION    ■ ColuxGlow textile is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at  150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE transparent yellow-green photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / liter  APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use.

Field of application Textile printing ink SET 5 x 100 ml ColuxGlow screen printing ink for glow-in-the-dark T-shirt do-it-yourself   Water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon and viscose to make your own glow-in-the-dark T-shirt. WHAT CAN COLUXGLOW INK DO? ColuxGlow afterglow screen printing ink textile is a water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon and viscose. BRIEF DESCRIPTIONColuxGlow water-based ink system to make afterglow t-shirt yourself, free of petrol, solvents and formaldehyde. Contains no banned substances according to Ökotex Standard and is free of THM Annex 38.APPLICATION    ■ ColuxGlow Textil is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at  150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Coloured photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / liter  APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 100 ml cans SHELF LIFE Use up ink within 12 months - stir before use.

Field of application Textile Printing Ink BlueColuxGlow Afterglow Screen Printing Ink that glows   Water based screen printing ink that glows for printing on cotton and synthetic fabrics made of polyester, nylon . WHAT CAN COLUXGLOW INK DO? ColuxGlow screen printing ink that glows is a water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon.BRIEF DESCRIPTIONColuxGlow water-based ink system screen printing ink that glows is free of petrol, solvents and formaldehyde. Contains no banned substances according to Ökotex Standard and is free from THM Annex 38.APPLICATION    ■ ColuxGlow textile is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at  150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Coloured photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / liter  APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use.  

Field of application ColuxGlow Screen Printing Ink Textile afterglow blue transparent Water based screen printing ink textile afterglow blue for printing on cotton and synthetic fabrics made of polyester, nylon. WHAT CAN COLUXGLOW INK DO? ColuxGlow afterglow screen printing ink textile is a water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon.BRIEF DESCRIPTIONColuxGlow water-based ink system afterglow screen printing ink textile, free of petrol, solvents and formaldehyde. Contains no banned substances according to Ökotex standard and is free from THM Annex 38.APPLICATION    ■ ColuxGlow textile is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at  150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE transparent blue photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / litre  APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use.

Field of application Textile printing ink green ColuxGlow with screen printing ink photoluminescent   Water based screen printing ink photoluminescent for printing on cotton and synthetic fabrics made of polyester, nylon. WHAT CAN COLUXGLOW INK DO? ColuxGlow screen printing ink photoluminescent textile is a water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon.BRIEF DESCRIPTIONColuxGlow water-based ink system screen printing ink photoluminescent are free of gasoline, solvents and formaldehyde. Contains no prohibited substances according to Ökotex Standard and is free from THM Annex 38.APPLICATION    ■ ColuxGlow textile is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at  150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Coloured photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / liter  APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use.

Field of application Textile printing ink Pink ColuxGlow Screen printing ink Colour that glows at night   Water based textile printing ink - screen printing ink colour that glows at night for printing on cotton and synthetic fabrics made of polyester, nylon.   WHAT CAN COLUXGLOW INK DO? ColuxGlow screen printing ink that glows at night for textile is a water based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon . BRIEF DESCRIPTIONColuxGlow water based ink system screen printing inks that glow at night are free of petrol, solvents and formaldehyde. Contains no banned substances according to Ökotex Standard and is free from THM Annex 38.APPLICATION    ■ ColuxGlow textile is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at  150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Coloured photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / liter  APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use.

Field of application Textile Printing Ink Yellow ColuxGlow Screen Printing Ink yellow luminous   Water based textile printing ink yellow luminous for printing on cotton and synthetic fabrics made of polyester, nylon. WHAT CAN COLUXGLOW INK DO? ColuxGlow screen printing ink yellow luminescent textile is a water-based textile printing ink for printing on cotton and synthetic fabrics made of polyester, nylon.BRIEF DESCRIPTIONColuxGlow water-based ink system screen printing ink yellow luminescent is free of gasoline, solvents and formaldehyde. Contains no prohibited substances according to Ökotex Standard and is free from THM Annex 38.APPLICATION    ■ ColuxGlow textile is a ready-to-print textile ink. Thinning, if necessary, is possible by adding a special thinner. Do not dilute with water. Water separates the pigments from the system. ■ Depending on the print motif and substrate, PES or polyester fabrics of 21-45 threads/cm are used. The printing stencil must have a water-resistant screen emulsion. Classic textile permanent stencils are suitable■ ColuxGlow textile dries both in the air at room temperature (approx. 15-20 min.) and under hot air and IR exposure in textile dryers. The drying time depends on the absorbency of the textile substrate. ■ Heat fix only coloured inks: After the ink has dried at room temperature, the prints are heat set for approx. 1 min. at  150° C hot air or hot press or iron and baking paper. (Step omitted for transparent inks)NOTEA plastisol background print is unsuitable! Simply clean the screen with water and dissolve dried ink residues with ethyl acetate. SPECIFICATION FUNCTION Screen printing ink for luminous motifs COLOUR TONE Coloured photoluminescent DENSITY 1,2 g/l LAYER 21-45 mesh screen CONSUMPTION 10 sqm / litre  APPLICATION not dilutable, for cotton and polyester and nylon PRINTING TECHNOLOGY Screen printing PROCESSING 15-20 minutes drying, then heat fix - not applicable for transparent grades. DRYING TIME PRINTING 15-20 min. UNDERPRINTING/OVERPRINTING NOT SUITABLE WASH RESISTANT 12 hours or after fixation PACKAGING 200 ml and 1 litre cans SHELF LIFE Use up ink within 12 months - stir before use.

Thinner - Retarder for artist colours afterglow For use in the following ColuxGlow artists' colours afterglow: Airbrush paint - Painting colours - Textile painting colours - Screen printing colours We recommend the thinner retarder for the afterglow artist colours if the colours have been stored for a longer period of time and thicken a little or if they need an increased flowing property in your printing process. Water is generally not recommended!