Field of application Test certificate based on the DIN 67510 standard for photoluminescent markings Test certificate of the luminance measurement from the product standard for photoluminescent markings Creation of a test certificate from a laboratory order in accordance with DIN 67510-4 with the values of the luminance measurement and luminous duration determination for photoluminescent markings. The photoluminescent products tested in this way show the results  in relation to the specifications of ASR A3.4/7 and DIN 67510-4 Class B or C and can be assigned accordingly. ASR A3.4/7 : Workplace safety Class B: For better orientation on escape and rescue routes in the dark Class C: If no sufficient safety lighting is available as well as for the installation of photoluminescent markings for optical safety guidance systems. Type and scope of service Scope of services: Testing of the reset pattern from the standard or from the special design. Additional service: Testing of one of the customer's objects that you make available to us for measurement.

Application area Polyurethane Paint 2K Paint  Marking Luminous Paint Orange (for interior use) with ColuxGlow Luminous Powder Marking luminescent paint can also be applied in thick layers as top coat in multi-layer corrosion protection systems for interior applications and as single-layer or top coats in machine and plant construction WHAT CAN COLUXGLOW PAINT DO? ColuxGlow Markierungsleuchtfarbe Orange can also be applied in thick coats as a topcoat in multi-layer corrosion protection systems for exterior applications and as a single-layer or topcoat in furniture, machine and plant construction - specifically: GRP, PU materials and pre-primed metal surfaces. SHORT DESCRIPTIONColuxGlow Marking Fluorescent Paint Orange is based on an OH-functional acrylic resin which is cross-linked by means of an aliphatic hardener (polyisocyanate adduct). APPLICATION    ■ The mixing ratio is taken into account in the pack sizes. The mixtures must be completely homogenized. We recommend using a stirrer to prepare the mixture and using a mixing container with a volume of approx. 1 L for this purpose. ■ Mix1.    Step: add binder and hardener - 3 min mixing time2.    Step: add powder - 3 min mixing time3.    Addition of 5-10 % universal thinner required! ■ Storage of finished mixtures beyond the specified pot life 4-6 hours is not possible. ■ TIP: Add thinner 40 gr. for brushing to 80 gr. for spraying! NOTE2K Binder Contains : Hydrocarbons,C9,Aromatics ; CAS No. : 64742-95-6; Reaction product of decanoic acid, 12-hydroxystearic acid and 1,2-ethanediamines React.mass: bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate and methyl1,2,2,6,6-pentamethyl-4-piperidyl sebacate AttentionSPECIFICATION FUNCTION Spray paint for luminous objects COLOUR TONE yellow-green or blue luminescent DENSITY 1,2 kg/L adjustable with dilution  LAYER 50-100 my dried film COMPONENTS 470 gr. base component G + 60 gr. hardener AL-17 + 270 gr. fluorescent powder gives 800 gr. mixture 2:1  APPLICATION Drip time 4-6 hours at 20-24 degrees C Universal thinner commercially available SPRITTABLE Cup gun with agitator PROCESSING Drying temperatures  at  10°C,  Humidity  above  85%  or  insufficient air movement, the drying times increase considerably. DRYING TIME DUST DRY 1 hour GRIP SOLID 3 hours WATERPROOF 24 hours PACKAGING 0,8 kg portioned see components SHELF LIFE Components  separately  in  unopened  Original containers  at  Storage temperatures between 15 and 25°C for at least 6 months. Storage temperatures  above  25°C  are  to  be avoided,

Application Polyurethane paint 2K coating with ColuxGlow luminescent powder   Afterglow paint can also be applied in thick coats as top coat in multi-layer corrosion protection systems for exterior applications and as single-layer or top coats in machine and plant construction WHAT CAN COLUXGLOW PAINT DO? ColuxGlow polyurethane paint with luminescent powder can also be applied in thick layers as a topcoat in multi-layer protection systems for exterior applications and as a single-layer or topcoat in furniture, machine and plant construction - specifically: GRP, PU materials and pre-primed metal surfaces. BRIEF DESCRIPTIONColuxGlow polyurethane paint with luminescent powder is based on an OH-functional acrylic resin which is cross-linked by means of an aliphatic hardener (polyisocyanate adduct). APPLICATION    ■ The mixing ratio is taken into account in the pack sizes. The mixtures must be completely homogenized. We recommend using a stirrer to prepare the mixture and using a mixing container with a volume of approx. 1 L for this purpose. ■ Mix1.    Step: add binder and hardener - 3 min mixing time2.    Step: add powder - 3 min mixing time3.    Addition of 5-10 % universal thinner required! ■ Storage of finished mixtures beyond the specified pot life 4-6 hours is not possible. ■ TIP: Add thinner 40 gr. for brushing to 80 gr. for spraying! NOTE2K Binder Contains : Hydrocarbons,C9,Aromatics ; CAS No. : 64742-95-6; Reaction product of decanoic acid, 12-hydroxystearic acid and 1,2-ethanediamines React.mass: bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate and methyl1,2,2,6,6-pentamethyl-4-piperidyl sebacate Attention SPECIFICATION FUNCTION Spray paint for luminous objects COLOUR TONE yellow-green or blue luminescent DENSITY 1,2 kg/L adjustable with thinner  LAYER 50-100 my dried film COMPONENTS 470 gr. base component G + 60 gr. hardener AL-17 + 270 gr. illuminating powder gives 800 gr. mixture 2:1  APPLICATION Drip time 4-6 hours at 20-24 degrees C Universal thinner commercially available SPRITTABLE Cup gun with agitator PROCESSING Drying temperatures  at  10°C,  Humidity  above  85%  or  insufficient air movement, the drying times increase considerably. DRYING TIME DUST DRY 1 hour GRIP SOLID 3 hours WATERPROOF 24 hours PACKAGING 0,8 kg portioned see components SHELF LIFE Components  separately  in  unopened  Original containers  at  Storage temperatures between 15 and 25°C for at least 6 months. Storage temperatures  above  25°C  are  to  be avoided,

Application Polyurethane paint 2K coating with ColuxGlow luminescent powder   Afterglow paint can also be applied in thick coats as top coat in multi-layer corrosion protection systems for exterior applications and as single-layer or top coats in machine and plant construction WHAT CAN COLUXGLOW PAINT DO? ColuxGlow polyurethane paint with luminescent powder can also be applied in thick layers as a topcoat in multi-layer protection systems for exterior applications and as a single-layer or topcoat in furniture, machine and plant construction - specifically: GRP, PU materials and pre-primed metal surfaces. BRIEF DESCRIPTIONColuxGlow polyurethane paint with luminescent powder is based on an OH-functional acrylic resin which is cross-linked by means of an aliphatic hardener (polyisocyanate adduct). APPLICATION    ■ The mixing ratio is taken into account in the pack sizes. The mixtures must be completely homogenized. We recommend using a stirrer to prepare the mixture and using a mixing container with a volume of approx. 1 L for this purpose. ■ Mix1.    Step: add binder and hardener - 3 min mixing time2.    Step: add powder - 3 min mixing time3.    Addition of 5-10 % universal thinner required! ■ Storage of finished mixtures beyond the specified pot life 4-6 hours is not possible. ■ TIP: Add thinner 40 gr. for brushing to 80 gr. for spraying! NOTE2K Binder Contains : Hydrocarbons,C9,Aromatics ; CAS No. : 64742-95-6; Reaction product of decanoic acid, 12-hydroxystearic acid and 1,2-ethanediamines React.mass: bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate and methyl1,2,2,6,6-pentamethyl-4-piperidyl sebacate Attention SPECIFICATION FUNCTION Spray paint for luminous objects COLOUR TONE yellow-green or blue luminescent DENSITY 1,2 kg/L adjustable with thinner  LAYER 50-100 my dried film COMPONENTS 470 gr. base component G + 60 gr. hardener AL-17 + 270 gr. illuminating powder gives 800 gr. mixture 2:1  APPLICATION Drip time 4-6 hours at 20-24 degrees C Universal thinner commercially available SPRITTABLE Cup gun with agitator PROCESSING Drying temperatures  at  10°C,  Humidity  above  85%  or  insufficient air movement, the drying times increase considerably. DRYING TIME DUST DRY 1 hour GRIP SOLID 3 hours WATERPROOF 24 hours PACKAGING 0,8 kg portioned see components SHELF LIFE Components  separately  in  unopened  Original containers  at  Storage temperatures between 15 and 25°C for at least 6 months. Storage temperatures  above  25°C  are  to  be avoided,